1.1 这些测试方法涵盖各种材料和结构类型的固定滞留空心金属视觉系统。这些固定的中空金属视觉系统用于拘留所和教养所的墙壁开口，用于监禁囚犯。 1.2 根据这些试验方法研究的框架组件包括单个组件，包括安全中空金属框架、框架锚固、安全玻璃、面板和可拆卸玻璃挡块。 1.3 这些测试方法旨在测试固定滞留中空金属视觉系统防止、延迟和阻止逃跑的能力； 限制或控制对未经授权或安全区域的访问；防止违禁品通过。 1.4 这些测试方法主要适用于拘留/管教设施内通常存在的安全区域之间的拘留中空金属视觉系统，例如:日间室、控制室、牢房和sally ports。只要遵循测试和报告程序，这些测试方法适用于空心金属以外的视觉系统。 1.5 以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。 本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 惩戒管理官员的一个主要担忧是拘留/惩戒设施中使用的安全屏障对某些类型的人身攻击的抵抗力，这在现场是合理的。 这些测试方法旨在帮助确定固定式金属视觉系统的物理安全水平。 4.2 这些测试方法不是为了测量视觉系统受到腐蚀剂、高能步枪、炸药、锯切或其他此类方法攻击的阻力。这些测试方法旨在评估视觉系统对使用殴打设备（如长椅、床铺、灭火器或桌子）的暴力攻击的抵抗力；手枪达到并包括。44万能；以及使用床垫、书籍和类似易燃材料引发的火灾。 4.3 本标准的主要目的或结果是提供详细的测试方法，以接近视觉系统在现场可能遭受的滥用程度。使用它的预期结果是，在发生此类袭击时，为公众、监狱管理人员和囚犯本人提供保护。 4.4 建议拘留/教养设施管理部门提供足够的培训、监督和预防性维护计划，以使门组件在整个预期使用寿命内按预期运行。

1.1 These test methods cover fixed detention hollow metal vision systems of various materials and types of construction. These fixed hollow metal vision systems are used in wall openings in detention and correctional institutions designed to incarcerate inmates. 1.2 Frame assemblies investigated under these test methods include individual components including detention security hollow metal frames, frame anchoring, security glazing, panels, and removable glazing stops. 1.3 These test methods are designed to test the capability of a fixed detention hollow metal vision system to prevent, delay, and frustrate escape; to limit or control access to unauthorized or secured areas; and prevent passage of contraband. 1.4 These test methods apply primarily to detention hollow metal vision systems between secure areas generally found inside a detention/correctional facility such as: day rooms, control rooms, cells, and sally ports. These test methods are applicable to vision systems other than hollow metal, provided testing and reporting procedures are followed. 1.5 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 A major concern for corrections administration officials is the resistance of security barriers used in detention/correctional facilities to certain types of physical attack that it is reasonable to expect in the field. These test methods are designed to aid in identifying a level of physical security for fixed detention hollow metal vision systems. 4.2 These test methods are not intended to provide a measure of resistance for a vision system subjected to attack by corrosive agents, high-powered rifles, explosives, sawing, or other such methods. These test methods are intended to evaluate the resistance of a vision system to violent attacks using battering devices such as benches, bunks, fire extinguishers, or tables; hand guns up to and including the.44 magnum; and fires started by using mattresses, books, and similar flammable materials. 4.3 The primary purpose or result of this standard is to provide detailed test methods that approximate the levels of abuse to which it is possible that vision systems become subjected in the field. The desired result of its use is to give assurance of protection to the public, to prison administrative personnel, and to the inmates themselves in the event of such attack. 4.4 It is recommended that detention/correctional facility administration provide adequate training, supervision and preventative maintenance programs to enable door assemblies to function as intended throughout the expected service life.