首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D3262-20
到馆提醒
收藏跟踪
购买正版
Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe 标准规格
发布日期: 2020-03-01
1.1 本规范涵盖机械制造的8英寸玻璃纤维管。(200 mm)至156 in。(4000 mm),用于输送生活污水、雨水和一些工业废物的重力流系统。玻璃纤维增强热固性树脂管(RTRP)和玻璃纤维增强聚合物砂浆管(RPMP)均为玻璃纤维管。 注1: 就本标准而言,聚合物不包括天然聚合物。 1.2 尽管本规范主要适用于埋地应用中安装的管道,但在适用于其他安装的范围内也可以接受,例如但不限于现有管道的顶管、隧道衬砌和滑动修复。 注2: 没有已知的ISO等效于本标准。 1.3 以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.4 以下安全隐患警告仅适用于试验方法部分第节 8. ,符合本规范。 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全、健康和环境实践,并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。
1.1 This specification covers machine-made fiberglass pipe, 8 in. (200 mm) through 156 in. (4000 mm), intended for use in gravity-flow systems for conveying sanitary sewage, storm water, and some industrial wastes. Both glass-fiber-reinforced thermosetting-resin pipe (RTRP) and glass-fiber-reinforced polymer mortar pipe (RPMP) are fiberglass pipes. Note 1: For the purposes of this standard, polymer does not include natural polymers. 1.2 Although this specification is suited primarily for pipes to be installed in buried applications, it is acceptable to apply it to the extent applicable for other installations such as, but not limited to, jacking, tunnel lining and sliplining rehabilitation of existing pipelines. Note 2: There is no known ISO equivalent to this standard. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 The following safety hazards caveat pertains only to the test method portion, Section 8 , of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.
分类信息
关联关系
研制信息
归口单位: D20.23
相似标准/计划/法规