ISO 24047:2021-塑料.聚乙烯（PE）和聚丙烯（PP）热塑性塑料.用ICP-OES测定金属含量 -国家数字标准馆

现行 ISO 24047:2021

到馆阅读

收藏跟踪

购买正版

Plastics — Polyethylene (PE) and polypropylene (PP) thermoplastics — Determination of metal content by ICP-OES 塑料.聚乙烯（PE）和聚丙烯（PP）热塑性塑料.用ICP-OES测定金属含量

发布日期： 2021-02-17

本文件规定了用电感耦合等离子体发射光谱法（ICP-OES）测定聚乙烯（PE）和聚丙烯（PP）中金属含量的方法。
本文件适用于镁（Mg）、铝（Al）、钙（Ca）、锌（Zn）、铬（Cr）、钛（Ti）、铁（Fe）、锑（Sb）、铜（Cu）、铅（Pb）、镉（Cd）等含量的测定。由于汞（Hg）的挥发性，本文件不适用于汞（Hg）的测定。
该方法适用于PE、PP、PE/PP共聚物及其共混物的基础聚合物。

This document specifies a method for the determination of metal content in polyethylene (PE) and polypropylene (PP) by inductively coupled plasma optical emission spectrometry (ICP-OES).
This document is applicable to the determination of the content of magnesium (Mg), aluminium (Al), calcium (Ca), zinc (Zn), chromium (Cr), titanium (Ti), iron (Fe), antimony (Sb), copper (Cu), lead (Pb), cadmium (Cd), etc. This document is not applicable to the determination of mercury (Hg) due to its volatility.
This method is suitable for base polymers of PE, PP, PE/PP copolymer and their blends.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 83.080.20塑料 - 热塑性塑料

关联关系

研制信息

归口单位： ISO/TC 61/SC 9

相似标准/计划/法规

BS ISO 24047-2021

Plastics. Polyethylene (PE) and polypropylene (PP) thermoplastics. Determination of metal content by ICP-OES
塑料聚乙烯（PE）和聚丙烯（PP）热塑性塑料 ICP-OES法测定金属含量

Plastic networks to centralize water meters. Polyethylene (PE) and polypropylene (PP) networks with butt welded joints
集中水表的塑料网络带对接焊接接头的聚乙烯（PE）和聚丙烯（PP）网络

BS ISO 18263-1-2015

Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging-Designation system and basis for specification
塑料聚丙烯（PP）和聚乙烯（PE）的混合物从PP和PE中回收用于柔性和刚性消费品包装

Testing and characterization of mechanically recycled polypropylene (PP) and polyethylene (PE) for intended use in different plastics processing techniques
用于不同塑料加工技术的机械回收聚丙烯（PP）和聚乙烯（PE）的测试和表征

BS ISO 18263-2-2015

Plastics. Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging-Preparation of test specimens and determination of properties
塑料聚丙烯（PP）和聚乙烯（PE）的混合物从PP和PE中回收用于柔性和刚性消费品包装

ISO 18263-1-2015

Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 1: Designation system and basis for specification
塑料 - 由用于柔性和刚性消费品包装的Pp和Pe衍生的聚丙烯（Pp）和聚乙烯（Pe）回收物的混合物 - 第1部分:指定系统和规格的基础

GB/T 39690.1-2020

塑料源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物第1部分：命名系统和分类基础
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 1: Designation system and basis for specification

BS EN ISO 15494-2018+A1-2020

Plastics piping systems for industrial applications. Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP). Metric series for specifications for components and the system
工业用塑料管道系统聚丁烯（PB）、聚乙烯（PE）、耐高温聚乙烯（PE-RT）、交联聚乙烯（PE-X）、聚丙烯（PP）组件和系统规范的公制系列

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system
用于工业应用的塑料管道系统 - 聚丁烯（PB）聚乙烯（PE）耐高温聚乙烯（PE-RT）交联聚乙烯（PE-X）聚丙烯（PP） - 用于组件和系统

ISO 18263-2-2015

Plastics — Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging — Part 2: Preparation of test specimens and determination of properties
塑料 - 用于柔性和刚性消费包装的聚丙烯（PP）和聚乙烯（PE）回收材料的混合物用于柔性和刚性消费包装 - 第2部分:试样的制备和性能测定

GB/T 39690.2-2020

塑料源自柔性和刚性消费品包装的聚丙烯（PP）和聚乙烯（PE）回收混合物第2部分：试样制备和性能测定
Plastics—Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging—Part 2：Preparation of test specimens and determination of properties

ISO 15494-2015/Amd 1-2020

Plastics piping systems for industrial applications — Polybutene (PB), polyethylene (PE), polyethylene of raised temperature resistance (PE-RT), crosslinked polyethylene (PE-X), polypropylene (PP) — Metric series for specifications for components and the system — Amendment 1
工业用塑料管道系统.聚丁烯（PB）、聚乙烯（PE）、耐高温聚乙烯（PE-RT）、交联聚乙烯（PE-X）、聚丙烯（PP）.部件和系统规范的米制系列.修改件1

UNE-EN ISO 15494-2004

Plastics piping systems for industrial applications - Polybutene (PB), polyethylene (PE) and polypropylene (PP) - Specifications for components and the system - Metric series (ISO 15494:2003)
工业用塑料管道系统聚丁烯（PB）、聚乙烯（PE）和聚丙烯（PP）.部件和系统规范.米制系列（ISO 15494-2003）

Plastics piping systems for non-pressure underground drainage and sewerage — Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP), polypropylene with mineral modifiers (PP-MD) and polyethylene (PE) — Specifications for manholes and inspection chambers in traffic areas and underground installations
无压地下排水和排污用塑料管道系统——未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）、含矿物改性剂的聚丙烯（PP-MD）以及聚乙烯（PE）和mdash；交通区域和地下设施的人孔和检查室规范

BS EN 13598-2-2020

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-Specifications for manholes and inspection chambers
无压地下排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）

BS EN 13598-1-2020

Plastics piping systems for non-pressure underground drainage and sewerage. Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-Specifications for ancillary fittings and shallow chambers
无压地下排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）

BS PD CEN/TS 13476-4-2019

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-Assessment of conformity
无压地下排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）的结构化壁管系统合格评定

BS EN 13476-1-2018

Plastics piping systems for non-pressure underground drainage and sewerage. Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE)-General requirements and performance characteristics
无压地下排水和排污用塑料管道系统未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）的结构化壁管系统一般要求和性能特征

UNE-EN 13598-1-2004

Plastics piping systems for non-pressure underground drainage and sewerage - Unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: Specifications for ancillary fittings including shallow inspection chambers
无压地下排水和污水用塑料管道系统.未增塑聚氯乙烯（PVC-U）聚丙烯（PP）和聚乙烯（PE）.第1部分:包括浅检查室的辅助配件规范

UNE-EN 13476-1-2007

Plastics piping systems for non-pressure underground drainage and sewerage - Structured-wall piping systems of unplasticized poly(vinyl chloride) (PVC-U), polypropylene (PP) and polyethylene (PE) - Part 1: General requirements and performance characteristics
无压地下排水和污水用塑料管道系统.未增塑聚氯乙烯（PVC-U）、聚丙烯（PP）和聚乙烯（PE）的结构化壁管系统.第1部分:一般要求和性能特征

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统