本文件提供了用于在宽体飞机上运输车辆的车辆运输装置的功能、尺寸、结构和环境要求。这些设备拟与NAS 3610或AS36100认可的空运货盘或专门设计和认可的空运货盘一起使用。单位装载装置（ULD）应便于在回程运输期间更改普通货物的运输。NAS 3610和AS36100中还描述了与现有托盘一起使用的托盘网，以限制普通货物。最低基本标准通过使用“应”一词来确定。推荐标准通过使用关键词“应该”来确定，虽然不是强制性的，但在提供可靠、经济和实用的车辆运输设备方面，推荐标准被认为是最重要的。只有在仔细考虑、广泛测试和彻底的服务评估表明替代方法令人满意后，才能出现与推荐标准的偏差。 本文件旨在规定最低限度的空中和地面处理功能，并确保交换能力以及与当前和未来的空中运输和地面处理系统的兼容性。本文件的目的不是指定设备设计。

This document provides functional, dimensional, structural, and environmental requirements for vehicle transport devices used to transport vehicles in wide-body aircraft. These devices are intended for use either in conjunction with NAS 3610 or AS36100 approved air cargo pallets or with specially designed and approved air cargo pallets. The unit load device (ULD) shall facilitate alteration for carriage of general cargo during return haul. Pallet nets used in conjunction with existing pallets in order to restrain general cargo are also described in NAS 3610 and AS36100.The minimum essential criteria are identified by use of the word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be of primary importance in providing dependable, economical, and practical vehicle transport devices. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluations have shown alternate methods to be satisfactory.It is the intent of this document to specify minimum air and ground handling features and to ensure interchange capability and compatibility with present and future air transport and ground handling systems. It is not the intent of this document to specify equipment designs.