轮廓法测量表面粗糙度的仪器 术语
Instrument for the measurement of surface roughness by the profile method-Terms

2010-02-11

表面粗糙度计量器具
Measuring Instruments for Surface Roughness

1989-06-22

触针式表面粗糙度测量仪校准规范
Calibration Specification for Contact(Stylus)Instruments of Surface Roughness Measurement by Profile Method

2018-02-27

광파 간섭식 표면 거칠기 측정기
用干涉法测量表面粗糙度的仪器

2016-11-30

촉침식 표면 거칠기 측정기
用触针法测量表面粗糙度的仪器

2021-12-15

광파 간섭식 표면 거칠기 측정기
用于通过干涉法测量表面粗糙度的仪器

2016-11-30

Instruments for the measurement of surface roughness by the interferometric method
用干涉法测量表面粗糙度的仪器

1973-01-01

Средства измерений шероховатости поверхности профильным методом. Профилографы-профилометры контактные. Типы и основные параметры
通过轮廓法测量表面粗糙度的仪器 接触轮廓仪和轮廓仪 类型和主要参数

Roughness measurement - Roughness measurement using contact (stylus) instruments - Profile method - Setup, measurement conditions, procedure
粗糙度测量.使用接触（触针）仪器的粗糙度测量.轮廓法.设置 测量条件和程序

2008-10-01

Приборы оптические для измерения параметров шероховатости поверхности. Типы и основные параметры
用于表面粗糙度参数测量的光学仪器 基础参数和类型

Государственная система обеспечения единства измерений. Приборы контактные (щуповые) для измерения шероховатости поверхности. Методика калибровки
确保测量一致性的状态系统 用于测量表面粗糙度的接触（触针）仪器 校准程序

Государственная система обеспечения единства измерений. Приборы контактные (щуповые) для измерений шероховатости поверхности. Метрологические характеристики фазокорректированных фильтров
确保测量一致性的状态系统 用于测量表面粗糙度的接触（触针）仪器 校正过滤器的计量特征

Preparation of steel substrates before application of paints and related products. Surface roughness characteristics of blast-cleaned steel substrates-Method for the calibration of ISO surface profile comparators and for the determination of surface profile. Stylus instrument procedure
涂料和相关产品使用前钢衬底的制备 喷砂清理钢基体的表面粗糙度特性

2012-03-31

도료 및 관련 제품의 도장 전 철강 소지 조정－마찰 세정된 철강 소지의 표면 거칠기 특성－제4부：ISO 표면 조도 비교 측정기 교정과 표면 조도 측정 방법－스타일러스법
涂料和有关产品使用前钢基体的制备喷砂清理钢基体的表面粗糙度特性第4部分:ISO表面轮廓比较器的校准和表面轮廓测定方法触针仪程序

2012-12-24

도료와 관련 제품의 도장 전 철강 소지 표면처리 — 블라스트 세정된 철강 소지의 표면 거칠기 특성 — 제4부: ISO 표면 조도 비교 측정기 교정과 표면 조도 측정방법 — 스타일러스법
涂料和相关产品使用前钢衬底的制备.喷砂清理钢衬底的表面粗糙度特性.第4部分:ISO表面轮廓比较器的校准和表面轮廓测定方法.触针仪器程序

2021-04-26

PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SURFACE ROUGHNESS CHARACTERISTICS OF BLAST-CLEANED STEEL SUBSTRATES. PART 4: METHOD FOR THE CALIBRATION OF ISO SURFACE PROFILE COMPARATORS AND FOR THE DETERMINATION OF SURFACE PROFILE. STYLUS INSTRUMENT PROCEDURE. (IS
涂料和相关产品使用前钢衬底的制备 喷砂清理钢基体的表面粗糙度特征 第4部分:ISO表面轮廓比较器校准和表面轮廓测定方法 手写笔仪器程序 （是

1996-03-21

Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 4: Method for the calibration of ISO surface profile comparators and for the determination of surface profile — Stylus instrument procedure
涂料和相关产品使用前钢衬底的制备——喷砂清理钢基体的表面粗糙度特性第4部分:ISO表面轮廓比较仪校准和表面轮廓测定方法——触针仪器程序

2012-02-22

涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface profi - Stylus instrument procedure

2013-07-19

Surface Texture, Roughness (Ra), Peak Count(Pc), and Mean Profile Spacing, (Rsm) Measurement of Metallic Coated and Uncoated Steel Sheet/Strip to be Formed and/or to be Painted
待成形和/或待涂漆的金属涂层和未涂层钢板/钢带的表面纹理、粗糙度（Ra）、峰值计数（Pc）和平均轮廓间距（Rsm）测量

2017-04-03

Государственная система обеспечения единства измерений. Государственная поверочная схема для средств измерений параметров шероховатости Rmax, Rz в диапазоне от 0,001 до 3000 мкм и Ra в диапазоне от 0,001 до 750 мкм
确保测量一致性的状态系统 测量表面粗糙度参数Rmax Rz在0.001-3000μm范围内的仪器的状态验证计划 Ra在0.001-750m范围内

2015-03-27