首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 10948:2020
到馆阅读
收藏跟踪
购买正版
The application and use of hot- and cold-applied joint sealant systems for concrete pavements. Code of practice 混凝土路面热和冷接缝密封剂系统的应用和使用 业务守则
发布日期: 2020-07-31
本英国标准给出了接缝密封胶槽的制备和密封的建议 道路、机场接缝用冷热接缝密封剂的应用和现场试验, 裸露的混凝土路面和其他交通区域。虽然它主要适用于新作品,但 它包含的原则适用于新工程和维修,以及重新密封的建议。购买本文件时可获得的所有当前修订均包含在购买本文件中。
This British Standard gives recommendations for the preparation of joint sealant slots and for the application and site testing of hot- and cold-applied joint sealants for use in joints in roads, airfields, exposed concrete pavements and other trafficked areas. Although it applies mainly to new work, the principles it contains apply to both new works and repairs, and recommendations for resealing.All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 5212-2-1990
Cold applied joint sealant systems for concrete pavements-Code of practice for the application and use of joint sealants
混凝土路面冷涂接缝密封剂系统 接缝密封剂的应用和使用实施规程
1990-06-29
现行
BS 2499-2-1992
Hot-applied joint sealant systems for concrete pavements-Code of practice for the application and use of joint sealants
混凝土路面的热涂接缝密封剂系统 接缝密封剂的应用和使用实施规程
1992-04-01
现行
ASTM D5249-10(2021)
Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints
用于波特兰 - 水泥混凝土和沥青接头的冷和热应用接头密封剂的衬垫材料标准规范
2021-05-01
现行
AS/NZS 2642.3-2008
Polybutylene (PB) plumbing pipe systems, Part 3: Mechanical jointing fittings for use with polybutylene (PB) pipes for hot and cold water applications
聚丁烯(PB)管道系统第3部分:与冷热水用聚丁烯(PB)管道一起使用的机械连接配件
2008-03-17
现行
AS/NZS 2537.3-2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications, Part 3: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fitness for purpose of the system (ISO 15875-5:2003, MOD)
压力用交联聚乙烯(PE-X)机械连接配件第3部分:冷热水装置用塑料管道系统交联聚乙烯(PE-X)系统适用性
2011-04-13
现行
AS/NZS 2537.1-2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications, Part 1: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - General (ISO 15875-1:2003, MOD)
压力用交联聚乙烯(PE-X)机械连接配件第1部分:冷热水装置用塑料管道系统交联聚乙烯(PE-X)总则
2011-04-13
现行
AS/NZS 2537.2-2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications, Part 2: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Fittings (ISO 15875-3:2003, MOD)
压力用交联聚乙烯(PE-X)机械连接配件第2部分:冷热水装置用塑料管道系统交联聚乙烯(PE-X)配件
2011-04-13
现行
AS 2537.4-2011
Mechanical jointing fittings for use with crosslinked polyethylene (PE-X) for pressure applications, Part 4: Plastics piping systems for hot and cold water installations - Crosslinked polyethylene (PE-X) - Guidance for the assessment of conformity (ISO/TS 15875-7:2003, MOD)
压力用交联聚乙烯(PE-X)机械连接配件第4部分:冷热水装置用塑料管道系统交联聚乙烯(PE-X)合格评定指南
2011-04-13