IEC 60384的本部分适用于电子设备中使用的带有金属化电极和聚丙烯电介质的固定电容器。 注:具有混合薄膜和金属化电极的电容器也在本标准的范围内。 根据使用条件，这些电容器可能具有“自愈”特性。 本规范涵盖的电容器主要用于交流电压和/或脉冲应用。适用的最大无功功率为10000 var，最大峰值电压为3000 V。 本文件不包括无功功率超过500 var且可在50 Hz下施加最大峰值电压为2500 V的电容器，除非它们是主要位于50 Hz下500 var以下的无功功率范围的最高部分。 本文件不打算涵盖高于20µF的电容值。 电容器有两个性能等级:长寿命应用的1级和一般应用的2级。 不包括用于抑制电磁干扰的电容器，但IEC 60384-14涵盖了这些电容器。 电击危险防护电容器（IEC技术委员会61的IEC 60065涵盖）、荧光灯和电动机电容器（IEC技术委员会33的IEC 60252-1和IEC 60252-2涵盖）以及管状荧光灯和其他放电灯电路用电容器（IEC技术委员会34的IEC 61048和IEC 61049涵盖）也不包括在内。交叉引用:IEC 60068- 1:2013EN 60384-1:2016IEC 60384-1:2016ISO 3IEC 60384-16EN 60384-16EN 60062IEC 60062EN 61193-2:2007EN 60068-1:2014IEC 61193-2:2007IEC 60068（系列）IEC 60417EN 60068（系列）IEC 60068EN 60384-14IEC 60384-14EN 60063IEC 60063购买本文件时可提供的所有当前修改件均包含在购买本文件中。

This part of IEC 60384 applies to fixed capacitors with metallized electrodes and polypropylene dielectric for use in electronic equipment. NOTE Capacitors that have mixed film and metallized electrodes are also within the scope of this standard. These capacitors may have "self-healing" properties depending on conditions of use. Capacitors covered by this specification are mainly intended for use with alternating voltage and/or for pulse applications. The maximum reactive power applicable is 10 000 var and the maximum peak voltage is 3 000 V. Capacitors for reactive power exceeding 500 var, and to which a maximum peak voltage of 2 500 V at 50 Hz can be applied, are not covered by this document, except when they are the highest part of a range of reactive power mainly situated below 500 var at 50 Hz. This document is not intended to cover capacitance values higher than 20 µF. Two performance grades of capacitors are covered, Grade 1 for long-life application and Grade 2 for general application. Capacitors for electromagnetic interference suppression are not included, but are covered by IEC 60384-14. Capacitors for electrical shock hazard protection (covered by IEC 60065 of IEC technical committee 61) and fluorescent lamp and motor capacitors (covered by IEC 60252-1 and IEC 60252-2 of IEC technical committee 33), and capacitors for use in tubular fluorescent and other discharge lamp circuits (covered by IEC 61048 and IEC 61049 of IEC technical committee 34) are also excluded.Cross References:IEC 60068-1:2013EN 60384-1:2016IEC 60384-1:2016ISO 3IEC 60384-16EN 60384-16EN 60062IEC 60062EN 61193-2:2007EN 60068-1:2014IEC 61193-2:2007IEC 60068 (series)IEC 60417EN 60068 (series)IEC 60068EN 60384-14IEC 60384-14EN 60063IEC 60063All current amendments available at time of purchase are included with the purchase of this document.