本SAE航空航天推荐规程概述了电磁干扰测量天线检验和校准的标准化且经济的方法。它的用途是在屏蔽室内测量距离天线1米的源时使用。这是执行军事EMC测试时使用的典型距离。未考虑屏蔽室对测量场强的影响。本标准不涉及未知分布式源发射的测量，但它试图通过在校准方法中使用另一个代表分布式源的天线来模拟现实。本文件提供了一种技术，用于根据参考文献2确定主要用于执行测量的天线的天线系数。1和2。2.版本B的目的是包括其他天线的校准，如双锥天线、喇叭天线、单极天线和小环天线，这些天线也在这些参考文献中指定使用。 D版包括与被测设备相隔1m的环形天线的具体程序。修订版E增加了现代仪器、如何校准混合天线的说明，并试图为用户提高本文件的清晰度。

This SAE Aerospace Recommended Practice outlines a standardized and economical method for the checkout and calibration of electromagnetic interference measurement antennas. Its application is for use when measuring a source 1 m from the antenna in a shield room. This is the typical distance used in performing military EMC testing. The influence of the shield room on the measured field strength is not considered. This standard does not address the measurement of emissions from an unknown distributed source, yet it attempts to resemble reality by using another antenna, in the calibration method, that represents a distributed source. This document presents a technique to determine antenna factors for antennas used primarily in performing measurements in accordance with References2.1and2.2. The purpose of Revision B was to include the calibration of other antennas, such as biconical, horn, monopole and small loop antennas that are also specified for use in these same references. Revision D includes a specific procedure for loop antennas that are separated by 1 m from the device under test. Revision E adds the inclusion of modern instrumentation, instruction on how to calibrate the hybrid antenna, and attempts to improve upon the clarity of this document for the user.