现行

DIN 14-3

ISO-metric screw thread; screw threads below 1 mm diameter; tolerances
ISO公制螺纹；直径小于1mm的螺纹；公差

1987-02-01

现行

DIN 14-4

ISO-metric screw thread; screw threads below 1 mm diameter; limits
ISO公制螺纹；直径小于1mm的螺纹；限制

1987-02-01

现行

DIN 14-2

ISO-metric screw thread; screw threads below 1 mm diameter; nominal dimensions
ISO公制螺纹；直径小于1mm的螺纹；标称尺寸

1987-02-01

现行

GOST 9000-1981

Основные нормы взаимозаменяемости. Резьба метрическая для диаметров менее 1 мм. Допуски
互换性的基本规范 公制螺纹直径小于1 mm 公差

现行

DIN 13-1

General purpose ISO metric screw threads - Nominal sizes for 1 mm to 68 mm diameter coarse pitch threads
ISO通用米制螺纹.第1部分:粗牙螺纹的标称尺寸；公称直径从1毫米到68毫米

1999-11-01

现行

DIN 2299-1

NOT GO screw ring gauges for general purpose ISO metric screw threads with nominal diameter from 1 mm to 200 mm
产品几何技术规范（GPS）.ISO米制螺纹用止动螺纹环规.第1部分:公称直径1 mm至200 mm；一般用途

2003-04-01

现行

DIN 13-28

ISO Metric Screw Threads; Coarse and Fine Screw Threads from 1 to 250 mm Screw Thread Diameter; Root Cross-sections, Tensile Stress Cross-sections and Pitch Angles
ISO公制螺纹；螺纹直径为1至250 mm的粗螺纹和细螺纹；根部横截面、拉伸应力横截面和节角

1975-09-01

现行

GOST 11709-1981

Основные нормы взаимозаменяемости. Резьба метрическая для деталей из пластмасс
塑料部件直径1-180 mm的公制螺纹 配置文件 基本尺寸和公差

现行

DIN 13-5

General purpose ISO metric screw threads - Nominal sizes for 1 mm and 1.25 mm fine pitch threads with diameters from 7.5 mm to 200 mm
ISO通用米制螺纹.第5部分:1 mm和1.25 mm细牙螺纹的标称尺寸；标称直径从7.5毫米到200毫米

1999-11-01

现行

DIN 13-9

General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹.第9部分:4mm细牙螺纹的标称尺寸；标称直径从40毫米到300毫米

1999-11-01

现行

DIN 13-2

General purpose ISO metric screw threads - Nominal sizes for 0.2 mm, 0.25 mm and 0.35 mm fine pitch threads with diameters from 1 mm to 50 mm
ISO通用米制螺纹-第2部分:0.2mm、0.25mm和0.35mm细牙螺纹的标称尺寸；公称直径从1毫米到50毫米

1999-11-01

现行

DIN 13-11

General purpose ISO metric screw threads - Part 11: Nominal sizes for 8 mm fine pitch threads with diameters from 130 mm to 1 000 mm
ISO通用米制螺纹.第11部分:8mm细牙螺纹的标称尺寸；标称直径从130毫米到1000毫米

1999-11-01

现行

DIN 13-20

General purpose ISO metric screw threads - Part 20: Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹-第20部分:具有优选公差等级的粗牙螺纹的尺寸限制；标称尺寸从1毫米到68毫米

2000-08-01

现行

DIN 2285-1

Geometrical product specifications (GPS) - GO screw ring gauges for ISO metric screw threads - Part 1: Nominal diameters from 1 mm up to 200 mm for general purposes
产品几何技术规范（GPS）ISO米制螺纹用“GO”螺纹环量规第1部分:一般用途公称直径1 mm至200 mm

2008-07-01

现行

DIN 13-21

ISO general purpose metric screw threads - Part 21: Limits of sizes for fine pitch threads with the prefered tolerance classes; Nominal diameter from 1 mm to 24.5 mm
ISO通用米制螺纹.第21部分:具有优选公差等级的细牙螺纹的尺寸限制；标称直径从1毫米到24.5毫米

2005-08-01

现行

DIN 2280

Geometrical product specifications (GPS) - GO and NOT GO screw plug gauges for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规格（GPS）-“通”和“不通”螺纹塞规 适用于标称直径为1 mm至40 mm的ISO通用公制螺纹

2001-12-01

现行

DIN 2284-1

NOT GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
几何参数的验证——“不合格”螺纹量规件.第1部分:公称直径为1mm至40mm的ISO通用公制螺纹用“不合格”车间量规、基准量规和定位量规

2000-01-01

现行

DIN 2282-1

GO screw gauging members for workshop plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm to 40 mm
几何参数的验证——“GO”螺纹量规件.第1部分:公称直径为1mm至40mm的ISO通用米制螺纹用“GO”车间量规、基准量规和定位量规

2000-01-01

现行

DIN 2281-1

Geometrical product specifications (GPS) - GO workshop screw plug gauges, check and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何规范（GPS）-“GO”螺纹塞规.第1部分:“GO”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹用塞规的检查和设置

2001-12-01

现行

DIN 2283-1

Geometrical product specifications (GPS) - NOT GO workhop screw plug gauges, check plugs and setting plugs for general purpose ISO metric screw threads with nominal diameters from 1 mm up to 40 mm
产品几何技术规范（GPS）-“不合格”螺纹塞规.第1部分:“不合格”车间量规.公称直径为1mm至40mm的ISO通用公制螺纹塞规的检查和设置

2001-12-01