BS EN 10025-1:2004规定了热轧结构钢扁平和长形产品的要求（见第3条） 不包括结构空心型材和管材的钢材。本文件第1部分规定了一般交货 条件以下部分给出了结构钢的具体要求:第2部分:非合金结构钢的交货技术条件Spart 3:正火/正火轧制可焊接细晶粒结构钢的交货技术条件Spart 4:热机轧制可焊接细晶粒结构钢的交货技术条件Spart 5: 耐大气腐蚀性能提高的结构钢的交货技术条件第6部分:淬火和回火条件下高屈服强度结构钢扁平产品的交货技术条件本文件中规定的钢材用于焊接、螺栓连接和铆接结构。根据参考文献中列出的标准和标准草案，BS EN 10025-1:2004不适用于涂层产品或一般结构应用的钢制品。交叉引用:EN 10020:2000EN 10021:1993EN 10025-2:2004EN 10025-3:2004EN 10025- 4:2004EN 10025-5:2004EN 10025-6:2004EN 10027-1EN 10052:1993EN 10079:1992EN 10164EN 10168EN 10204CR 10260EN ISO 9001ISO 9001:2000EN 10017EN 10024EN 1009EN 10034EN 10048EN 10051EN 10055EN 10056-1EN 10056-2EN 10058EN 10059EN 10060EN 10067EN 10162EN 10279EN 10002-1:2001EN 10045-1EN 10160EN 10306EN 10308CR 10261EN ISO 377:1997EN ISO 2566-SO2566-1:1984EN ISO 14284ISO 14284:1996EN ISO 17642-1ISO 17642-1:2004EN ISO 17642-2ISO 17642-2:2004EN ISO 17642-3ISO 17642-3:2004EN 1011-2EN 1993EN 10163-1EN 10163-2EN 10163-3EN 10149-1EN 10149-1EN 10210- 1EN 10219-1EN 10221EN 10225EN 10248-1EN 10249-1EN 10250-2EN 10268EN 10277-2prEN 10293EN 10297-1ECSC IC 2:1983

BS EN 10025-1:2004 specifies requirements for flat and long products (see Clause 3) of hot rolled structural steels excluding structural hollow sections and tubes. Part 1 of this document specifies the general delivery conditions.The specific requirements for structural steels are given in the following Parts:Part 2: Technical delivery conditions for non-alloy structural steelsPart 3: Technical delivery conditions for normalized/normalized rolled weldable fine grain structural steelsPart 4: Technical delivery conditions for thermomechanical rolled weldable fine grain structural steelsPart 5: Technical delivery conditions for structural steels with improved atmospheric corrosion resistancePart 6: Technical delivery conditions for flat products of high yield strength structural steels in the quenched and tempered conditionThe steels specified in this document are intended for use in welded, bolted and riveted structures.BS EN 10025-1:2004 does not apply to coated products or to steel products for general structural applications in accordance with the standards and draft standards listed in the Bibliography.Cross References:EN 10020:2000EN 10021:1993EN 10025-2:2004EN 10025-3:2004EN 10025-4:2004EN 10025-5:2004EN 10025-6:2004EN 10027-1EN 10027-2EN 10052:1993EN 10079:1992EN 10164EN 10168EN 10204CR 10260EN ISO 9001ISO 9001:2000EN 10017EN 10024EN 10029EN 10034EN 10048EN 10051EN 10055EN 10056-1EN 10056-2EN 10058EN 10059EN 10060EN 10061EN 10067EN 10162EN 10279EN 10002-1:2001EN 10045-1EN 10160EN 10306EN 10308CR 10261EN ISO 377ISO 377:1997EN ISO 643ISO 643:2003EN ISO 2566-1ISO 2566-1:1984EN ISO 14284ISO 14284:1996EN ISO 17642-1ISO 17642-1:2004EN ISO 17642-2ISO 17642-2:2004EN ISO 17642-3ISO 17642-3:2004EN 1011-2EN 1993EN 10163-1EN 10163-2EN 10163-3EN 10149-1EN 10149-2EN 10149-1EN 10210-1EN 10219-1EN 10221EN 10225EN 10248-1EN 10249-1EN 10250-2EN 10268EN 10277-2prEN 10293EN 10297-1ECSC IC 2:1983