IEC 61000-4-22:2010考虑了电气和/或电子设备的抗扰度试验和发射测量。只考虑辐射现象。它建立了使用全消声室进行辐射抗扰度测试和辐射发射测量所需的测试程序。IEC 61000-4-22:2010为全消声室（FAR）建立了通用验证程序、受试设备（EUT）设置要求和测量方法，当辐射电磁发射测量和辐射电磁抗扰度测试将在同一FAR中进行时。作为一项基本测量标准，IEC 61000的本部分无意规定适用于特定设备或系统的试验水平或排放限值。其主要目标是向IEC或CISPR的所有相关产品委员会提供通用测量程序。具体的产品要求和测试条件由负责的产品委员会定义。 本标准中描述的方法适用于30 MHz至18 GHz频率范围内的辐射发射测量和抗扰度试验。根据IEC指南107《电磁兼容性-电磁兼容性出版物起草指南》，IEC 61000-4-22:2010具有基本EMC出版物的地位。

IEC 61000-4-22:2010 considers immunity tests and emission measurements for electric and/or electronic equipment. Only radiated phenomena are considered. It establishes the required test procedures for using fully anechoic rooms for performing radiated immunity testing and radiated emission measurements. IEC 61000-4-22:2010 establishes a common validation procedure, equipment under test (EUT) set-up requirements, and measurement methods for fully anechoic rooms (FARs) when both radiated electromagnetic emission measurements and radiated electromagnetic immunity tests will be performed in the same FAR. As a basic measurement standard, this part of IEC 61000 does not intend to specify the test levels or emission limits to be applied to particular apparatus or system(s). Its main goal is to provide general measurement procedures to all concerned product committees of IEC or CISPR. Specific product requirements and test conditions are defined by the responsible product committees. The methods described in this standard are appropriate for radiated emission measurements and immunity tests in the frequency range of 30 MHz to 18 GHz. IEC 61000-4-22:2010 has the status of a basic EMC publication in accordance with IEC Guide 107, Electromagnetic compatibility - Guide to the drafting of electromagnetic compatibility publications.