BS ISO 965-4:2021-ISO通用公制螺纹公差-国家数字标准馆

现行 BS ISO 965-4:2021

到馆阅读

收藏跟踪

购买正版

ISO general purpose metric screw threads. Tolerances-Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with tolerance position H or G after galvanizing ISO通用公制螺纹公差

发布日期： 2021-07-26

                本文件规定了热浸镀锌公制外螺纹的节径和顶径的极限偏差和尺寸限制，符合ISO 262粗螺纹系列（从M8到M64），基本轮廓符合ISO 68-1。
本文件适用于热浸镀锌公制外螺纹，与镀锌后公差位置为H或G的内螺纹配合。交叉引用:ISO 68-1:1998ISO 262:1998ISO 898-1ISO 965-1:1998ISO 965-5:1998ISO 5408:1983

This document specifies limit deviations and limits of sizes for the pitch and crest diameters of the hot- dip galvanized metric external screw threads conforming to the coarse thread series of ISO 262 (from M8 to M64) having a basic profile according to ISO 68-1.
This document is applicable to the hot-dip galvanized metric external screw threads to mate with the internal screw threads tapped with tolerance position H or G after galvanizing.Cross References:ISO 68-1:1998ISO 262:1998ISO 898-1ISO 965-1:1998ISO 965-5:1998ISO 5408:1983

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS ISO 965-3-2021

ISO general purpose metric screw threads. Tolerances-Limit deviations for screw threads
ISO通用公制螺纹公差

BS ISO 965-2-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for general purpose external and internal screw threads. Medium quality
ISO通用公制螺纹公差

ISO general purpose metric screw threads. Tolerances. Limits of sizes for general purpose external and internal screw threads. Medium quality.
ISO通用公制螺纹公差通用外螺纹和内螺纹的尺寸限制中等质量

GB/T 15756-2008

普通螺纹极限尺寸
General purpose metric screw threads - Limits of sizes

JIS B 0209-2-2001

ISO general purpose metric screw threads -- Tolerances -- Part 2: Limits of sizes for general purpose external and internal screw threads -- Medium quality
ISO通用公制螺纹公差第2部分:通用外螺纹和内螺纹尺寸限值中等质量

ISO general purpose metric screw threads — Tolerances — Part 3: Limit deviations for screw threads
ISO通用米制螺纹.公差.第3部分:螺纹的极限偏差

ISO general purpose metric screw threads - Tolerances - Part 2: Limits of sizes for general purpose external and internal screw threads - Medium quality (ISO 965-2:1998)
ISO通用公制螺纹-公差-第2部分:通用外螺纹和内螺纹的尺寸限制；中等质量（ISO 965-2-1998）

BS ISO 965-5-1998+A1-2021

ISO general purpose metric screw threads. Tolerances-Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹公差

ISO general purpose metric screw threads. Tolerances. Deviations for constructional screw threads.
ISO通用公制螺纹公差结构螺纹的偏差

JIS B 0217-2-2013

ISO metric trapezoidal screw threads -- Tolerances -- Part 2: Limits of sizes for external and internal screw thread
ISO公制梯形螺纹公差第2部分:外螺纹和内螺纹尺寸限值

JIS B 0209-5-2001

ISO general purpose metric screw threads -- Tolerances -- Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing
ISO通用公制螺纹——公差SPART 5:与热浸镀锌外螺纹配合的内螺纹尺寸限制镀锌前最大公差位置为h

ISO Metric Trapezoidal Screw Thread; Allowances and Tolerances for Trapezoidal Screw Threads of General Purpose
ISO公制梯形螺纹；通用梯形螺纹的公差和公差

普通螺纹中等精度、优选系列的极限尺寸
General purpose metric screw threads--Limits of sizes for the screw threads of medium quality and preferable plan

普通螺纹粗糙精度、优选系列的极限尺寸
General purpose metric screw threads--Limits of sizes for the screw threads of coarse quality and preferable plan

GOST ISO 965-5-2015

Основные нормы взаимозаменяемости. Резьбы метрические ИСО общего назначения. Допуски. Предельные размеры внутренних резьб, сопрягаемых с горячеоцинкованными наружными резьбами, соответствующими до нанесения покрытия полям допусков с основными отклонениями до h включительно
互换性的基本规范 ISO通用公制螺纹公差内螺纹尺寸的限制与热镀锌外螺纹配合镀锌前最大公差位置h

General purpose ISO metric screw threads - Limits of size for 1 mm to 68 mm diameter coarse pitch threads with recommended tolerance classes
ISO通用米制螺纹.第9部分:4mm细牙螺纹的标称尺寸；标称直径从40毫米到300毫米

JIS B 0209-3-2001

ISO general purpose metric screw threads -- Tolerances -- Part 3: Deviations for constructional screw threads
ISO通用米制螺纹公差第3部分:结构螺纹的偏差

ISO general purpose metric screw threads - Tolerances - Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing (ISO 965-5:1998)
ISO通用米制螺纹公差第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制

ISO 965-5-1998/Amd 1-2021

ISO general purpose metric screw threads — Tolerances — Part 5: Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size of tolerance position h before galvanizing — Amendment 1
ISO通用米制螺纹.公差.第5部分:镀锌前最大公差位置为h的热浸镀锌外螺纹与内螺纹配合的尺寸限制.修改件1

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统