BS EN ISO 2746:2015描述了两种高压测试方法:测试A用于检测和定位搪瓷和搪瓷中的缺陷；测试B用于检测和定位釉瓷和搪瓷中的缺陷和薄弱点。使用直流或脉冲直流高压进行测试。本试验适用于搪瓷涂层的干燥表面。对于潮湿的表面，应特别小心 以确保正确定位任何缺陷。由于测试电压取决于涂层厚度，因此测试方法（尤其是测试A）可能不适用 适用于涂层厚度变化较大的试样。ISO 2360TS/ISO 479交叉引用- 1IEC/TS 60479-2IEC 60335-1IEC 60335-2-15IEC 60335-2-30购买本文件时提供的所有现行修订版均包含在购买本文件中。

BS EN ISO 2746:2015 describes two test methods of high voltage testing:Test A is used to detect and locate defects in vitreous and porcelain enamels;Test B is used to detect and locate defects and weak spots in vitreous and porcelain enamels.The tests are performed using DC or pulsed DC high voltage.The tests are applicable to dry surfaces of enamel coatings. In the case of moist surfaces, care should be taken to ensure that the locating of any defects is correctly performed.Since test voltages depend on the coating thickness, the test method, especially with test A, may not be suitable for test specimens for which the coating thickness varies to a large extent.Cross References:ISO 2178ISO 2360IEC/TS 60479-1IEC/TS 60479-2IEC 60335-1IEC 60335-2-15IEC 60335-2-30All current amendments available at time of purchase are included with the purchase of this document.