1.1 这些试验方法涵盖非卤化异丁烯-异戊二烯橡胶（IIR）（通常称为丁基橡胶）的评估和生产控制的标准材料、试验配方、混合程序和试验方法。 1.2 以国际单位制表示的数值应视为标准。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 这些测试方法主要用于仲裁目的，但可用于橡胶生产的质量控制。它们也可用于研究和开发工作，并用于比较标准配方中的不同橡胶样品。 3.2 这些试验方法可用于获得橡胶验收值。

1.1 These test methods cover the standard materials, test formula, mixing procedures, and test methods for the evaluation and production control of non-halogenated isobutene-isoprene rubbers (IIR), commonly known as butyl rubber. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 These test methods are mainly intended for referee purpose but may be used for quality control of rubber production. They may also be used in research and development work and for comparison of different rubber samples in a standard formula. 3.2 These test methods may be used to obtain values for acceptance of rubber.