BS EN ISO 10360-12:2016规定了用于验证铰接式起重机性能的验收试验 通过测量制造商规定的校准测试长度来测量臂坐标测量机。它还规定了 重新确认测试，使用户能够定期重新确认铰接臂的性能 三坐标测量机。它适用于使用触觉探头和可选光学距离传感器的关节臂坐标测量机 （也称为激光线扫描仪或激光线探头）。扫描仪附件测试的详细信息如下: 附录E中给出。ISO 10360的本部分没有规定测试的频率或时间（如果有），也没有规定 指定哪一方应承担测试费用。 ISO 10360的本部分规定了可由铰接式起重机制造商或用户指定的性能要求 arm CMM，验收和再认证测试的执行方式，以证明所述 要求、证明符合性的规则，以及可使用验收和再认证测试的应用。交叉引用:ISO 10360-8:2013ISO 10360-9:2013ISO 3650ISO 8015ISO 10360-1ISO 10360-2ISO 14253-1ISO 14638ISO 17450-1ISO/IEC指南99:2007Vim购买本文件时提供的所有现行修订均包含在购买本文件中。

BS EN ISO 10360-12:2016 specifies the acceptance tests for verifying the performance of an articulated arm CMM by measuring calibrated test lengths as stated by the manufacturer. It also specifies the reverification tests that enable the user to periodically reverify the performance of the articulated arm CMM. It applies to articulated arm CMMs using tactile probes and optionally optical distance sensors (also referred to as laser line scanners or laser line probes). Details on tests for scanner accessories are given in Annex E.This part of ISO 10360 does not specify how often or when testing is performed, if at all, nor does it specify which party should bear the cost of testing.This part of ISO 10360 specifiesperformance requirements that can be assigned by the manufacturer or the user of the articulated arm CMM,the manner of execution of the acceptance and reverification tests to demonstrate the stated requirements,rules for proving conformance, andapplications for which the acceptance and reverification tests can be used.Cross References:ISO 10360-8:2013ISO 10360-9:2013ISO 3650ISO 8015ISO 10360-1ISO 10360-2ISO 14253-1ISO 14638ISO 17450-1ISO/IEC Guide 99:2007VIMAll current amendments available at time of purchase are included with the purchase of this document.