BS 2HR 650:2011-螺栓、螺柱、固定螺钉和螺母（Ni 25.5、Cr 15、Ti 2、Mn 1.5、Mo 1.25、Si 0.7、V 0.3）制造用高膨胀耐热钢筋和钢丝规范（极限截面50 mm）-国家数字标准馆

现行 BS 2HR 650:2011

到馆阅读

收藏跟踪

购买正版

Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (limiting ruling section 50 mm) 螺栓、螺柱、固定螺钉和螺母（Ni 25.5、Cr 15、Ti 2、Mn 1.5、Mo 1.25、Si 0.7、V 0.3）制造用高膨胀耐热钢筋和钢丝规范（极限截面50 mm）

发布日期： 2011-01-31

交叉引用:BS HR 100购买本文件时，所有当前可用的修订均包含在购买本文件中。

Cross References:BS HR 100All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

现行

GOST 18143-1972

Проволока из высоколегированной коррозионностойкой и жаростойкой стали. Технические условия
高合金耐腐蚀和耐热钢丝规格

现行

SAE AMS5857D

Steel, Corrosion Resistant, Bars and Wire 19Cr - 10Ni (304) High Yield Strength Solution Heat Treated and Cold Worked
19Cr-10Ni（304）高屈服强度固溶热处理和冷加工耐腐蚀钢筋和线材

2019-11-05

现行

SAE AMS5738E

Steel, Corrosion Resistant, Bars and Wire 18Cr - 9Ni (303F) Free Machining, High Yield Strength Solution Heat Treated and Cold Worked
18Cr-9Ni（303F）自由加工、高屈服强度固溶热处理和冷加工的耐腐蚀钢筋和线材

2019-11-05

现行

BS 2HR 51-2010

Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C)
高膨胀耐热钢坯、棒材、锻件和零件规范（镍25.5、铬15、钛2、锰1.5、钼1.25、硅0.7、钒0.3）（980℃固溶处理）

2010-01-31

现行

BS 10/30238238 DC

BS 2HR 650. Specification for high expansion heat-resisting steel bar and wire for the manufacture of bolts, studs, set screws and nuts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Limiting ruling section 50 mm)
BS 2HR 650 螺栓、螺柱、固定螺钉和螺母（Ni 25.5、Cr 15、Ti 2、Mn 1.5、Mo 1.25、Si 0.7、V 0.3）制造用高膨胀耐热钢筋和钢丝规范（极限截面50 mm）

2010-11-24

现行

BS 09/30201774 DC

BS 2HR 51. Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1. 5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 degreesC)
BS 2HR 51 高膨胀耐热钢坯、棒材、锻件和零件规范（镍25.5、铬15、钛2、锰1.5、钼1.25、硅0.7、钒0.3）（在980摄氏度下进行固溶处理）

2009-08-24

现行

SAE AMS5934B

Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation-Hardenable
超高韧性、耐腐蚀钢、棒材、线材、锻件、环和挤压件13Cr-8.0Ni-2.2Mo-1.1Al真空感应加自耗电极熔化溶液热处理、沉淀硬化

2016-08-17

现行

SAE AMS5934/H1000

Steel, Extra High Toughness, Corrosion-Resistant, Bars, Wire, Forgings, Rings, and Extrusions 13Cr - 8.0Ni - 2.2Mo - 1.1Al Vacuum Induction Plus Consumable Electrode Melted Solution Heat Treated, Precipitation Hardened (H1000)
13Cr-8.0Ni-2.2Mo-1.1Al真空感应加自耗电极熔融固溶热处理、沉淀硬化（H1000）的超高韧性耐腐蚀钢、棒材、线材、锻件、环件和挤压件

2015-06-12