BS EN 60317-32:2016规定了玻璃纤维缠绕、树脂或清漆的要求 温度指数为155的浸渍裸铜或漆包扁铜绕组线。注:对于这种类型的电线，热冲击试验是不合适的，因此热冲击温度不能确定 建立。因此，基于温度指数和热冲击要求的等级 无法指定温度。本标准涵盖的标称导线尺寸范围为:宽度:最小2.0 mm，最大16.0 mm；厚度:最小0.80毫米，最大5.60毫米。指定的宽度和厚度组合以及指定的宽度/厚度 比率符合IEC 60317-0-4。交叉引用:IEC 60317-0-4:2015EN 60317-0-4:2016IEC 60264EN 60264IEC 60317EN 60317IEC 60851EN 60851购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 60317-32:2016 specifies the requirements of glass fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper winding wire, temperature index 155.NOTE For this type of wire, the heat shock test is inappropriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified.The range of nominal conductor dimensions covered by this standard is:width: min. 2,0 mm max. 16,0 mm;thickness: min. 0,80 mm max. 5,60 mm.The specified combinations of width and thickness as well as the specified width/thickness ratio are according to IEC 60317-0-4.Cross References:IEC 60317-0-4:2015EN 60317-0-4:2016IEC 60264EN 60264IEC 60317EN 60317IEC 60851EN 60851All current amendments available at time of purchase are included with the purchase of this document.