KS C IEC 61212-3-1-2015(2020)-绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管 -国家数字标准馆

现行 KS C IEC 61212-3-1-2015(2020)

到馆提醒

收藏跟踪

购买正版

열 경화성 수지재 원통적층 튜브 및 막대－제3부：개별 요구사항－제1절：원통적층 튜브 绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管

发布日期： 2015-12-28

                该标准提供了KS C IEC61212-3（所有部）中基于其他种类树脂和强化剂的电气用途的工业用轻质圆柱积层套管（刚性、圆形叠层轧管）的要求。适用和区别的特性如表1所示。适合该标准的材料满足规定水平的性能。但是，如果用户要为某一特定用途选择材料，不仅要依据该标准，还要根据适合该用途的性能所需的实际要求进行选择。安全警告:用户有责任安全使用该标准中规定或提及的方法。

이 표준은 KS C IEC 61212－3(모든 부) 중 다른 종류의 수지와 강화제에 기초한 전기적 용도의 산업용 경질의 원통 적층 튜브(rigid, round laminated rolled tube)에 대한 요구사항을 제공한다.적용 및 구별되는 특성은 표 1과 같다.이 표준에 적합한 재료는 규정된 수준의 성능을 만족한다. 그러나 어떤 특정한 용도를 위하여 사용자가 재료를 선택하려면, 이 표준에만 근거할 것이 아니라 해당 용도에 적합한 성능에 필요한 실제 요구사항에 따라 선택하여야 한다.안전 경고: 사용자는 이 표준에 규정되거나 언급된 방법을 안전하게 사용해야 할 책임이 있다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 29.035.01绝缘材料 - 绝缘材料综合

关联关系

研制信息

相似标准/计划/法规

BS EN 61212-3-3-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials-Round laminated moulded rods
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-2-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 2: Round laminated moulded tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-1-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 1: Round laminated rolled tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-2-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Methods of test
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

KS C IEC 61212-3-3(2018 Confirm)

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대
绝缘材料电工用热固性树脂基工业硬质圆形层压管和棒第3部分:单项材料规范活页3:圆形层压模压棒

IEC 61212-3-3-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第3页:圆形层压成型棒

KS C IEC 61212-3-3(2023 Confirm)

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대
绝缘材料电工用热固性树脂工业硬质圆层压管和棒第3部分:单项材料规范表3:圆形层压模塑棒

IEC 61212-3-1-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第1页:圆形层压轧制管

KS C IEC 61212-3-2

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 —제3부: 개별 재료에 대한 규격 —제2절: 원통 적층 성형 튜브
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

IEC 61212-3-2-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

GB/T 5132.5-2009

电气用热固性树脂工业硬质圆形层压管和棒第5部分：圆形层压模制棒
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

KS C IEC 61212-2

열 경화성 수지제 원통적층 튜브 및 막대 —제2부: 시험방법
绝缘材料 - 基于用于电气目的的热固性树脂的工业刚性圆形层压管和杆 - 第2部分:测试方法

BS EN 61212-1-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Definitions, designations and general requirements
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

IEC 61212-2-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
绝缘材料.电气用基于热固性树脂的工业刚性圆形层压管和棒.第2部分:试验方法

UNE-EN 61212-3-3-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: ROUND LAMINATED MOULDED RODS.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范表3:圆形层压成型杆

UNE-EN 61212-3-2-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: ROUND LAMINATED MOULDED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范第2页:圆形层压成型管

UNE-EN 61212-3-1-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: ROUND LAMINATED ROLLED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范活页1:圆形层压轧制管

BS 10/30216000 DC

BS EN 61212-3-2. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-2. Specifications for individual materials. Round laminated moulded tubes
英国标准EN 61212-3-2 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-2部分个别材料的规格圆形层压成型管

BS 10/30215996 DC

BS EN 61212-3-1. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-1. Specifications for individual materials. Round laminated rolled tubes
英国标准EN 61212-3-1 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-1部分个别材料的规格圆层压轧管

KS C IEC 61212-1

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 — 제1부: 정의, 명칭과 일반 요구사항
绝缘材料 - 基于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第1部分:定义名称和一般要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统