BS EN 60793-1-33:2017包含了五种主要试验方法的说明 应力腐蚀敏感性参数的测定。本文件的目的是建立机械设备的统一要求 硅基纤维的应力腐蚀敏感性特征。动态疲劳与疲劳 静态疲劳试验用于确定应力的（动态）nd值和（静态）ns值 腐蚀敏感性参数。目前，仅对nd值进行评估 规格本程序中大于18的测量值反映了 二氧化硅，大约是20。较高的值不会转化为明显的增强 抗疲劳性。交叉引用:IEC TR 62048:2014购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 60793-1-33:2017 contains descriptions of the five main test methods for the determination of stress corrosion susceptibility parameters.The object of this document is to establish uniform requirements for the mechanical characteristic of stress corrosion susceptibility for silica-based fibres. Dynamic fatigue and static fatigue tests are used to determine the (dynamic) nd value and (static) ns value of stress corrosion susceptibility parameters. Currently, only the nd-value is assessed against specification. Measured values greater than 18 per this procedure reflect the nd-value of silica, which is approximately 20. Higher values will not translate to demonstrable enhanced fatigue resistance.Cross References:IEC TR 62048:2014All current amendments available at time of purchase are included with the purchase of this document.