BS EN 16661:2015适用于使用压力设备操作的轮胎压力表（TPG） （固定或移动装置中使用的装置）为使用车辆（M1和M2）的道路轮胎充气 类别），并且可能能够与配备轮胎压力监测的车辆进行交互 TPMS系统，TPG可由TPMS/车辆操纵。为了设置正确的轮胎充气，本欧洲标准定义了轮胎充气的要求和过程 通过标准化接口和数据交换格式，TPG与TPMS/车辆的互操作性 允许TPG和TPMS/车辆之间使用先进的信息、管理和控制系统。这个 体系结构是开放的、可扩展的，以支持不同级别的互操作性（从完全互操作性到 完全手动）。本欧洲标准未定义通信协议（根据M/453专门制定的工程） 欧洲授权）。本欧洲标准可适用于EN 12645中引用的所有TPG类别。驾驶员/操作员被视为负责验证参数和轮胎压力。本欧洲标准将适用于基础设施解决方案（V2I-I2V）的开发 通信解决方案）交叉引用:ETSI DTS 101 556-2ISO 639-1EN 12645ISO 21750:2006欧洲指令M/457欧洲指令M/453UN ECE R64购买本文件时可获得的所有当前修订均包含在购买本文件中。

BS EN 16661:2015 applies to the tyre pressure gauges (TPG) which operate using pressure equipment (devices used in fixed or mobile installations) to inflate the tyres of road using vehicles (M1 and M2 categories) and which may be capable of interacting with vehicles equipped with tyre pressure monitoring systems (TPMS) whereby the TPG may be steered by the TPMS/vehicle.To set the correct tyre inflation, this European Standard defines requirements and processes for the interoperability of TPG with TPMS/vehicle, through standardized interfaces and data exchange formats allowing advanced information, management and control systems between TPG and TPMS/vehicle. The architecture is open and scalable to support the different levels of interoperability (from full interoperability to fully manual).This European Standard does not define communication protocols (works specifically made under M/453 European mandate).This European Standard may be applied to all TPG categories referenced in EN 12645.The driver/operator is considered as being responsible for the validation of the parameters and tyre pressure.This European Standard will be applicable upon development of Infrastructure solution (V2I-I2V communication solutions)Cross References:ETSI DTS 101 556-2ISO 639-1EN 12645ISO 21750:2006European mandate M/457European mandate M/453UN ECE R64All current amendments available at time of purchase are included with the purchase of this document.