BS EN 10263-1:2017-冷镦和冷挤压用钢棒、棒材和线材一般技术交货条件-国家数字标准馆

现行 BS EN 10263-1:2017

到馆阅读

收藏跟踪

购买正版

Steel rod, bars and wire for cold heading and cold extrusion-General technical delivery conditions 冷镦和冷挤压用钢棒、棒材和线材一般技术交货条件

发布日期： 2017-11-24

1.1 EN 10263的本部分规定了冷镦和冷挤压用圆棒、圆棒和线材的一般交货技术条件:a）按照EN 10263的规定，冷加工后不进行热处理的非合金钢？2.b） EN 10263中规定的用于表面硬化的非合金钢和合金钢？3.c） EN 10263中规定的淬火和回火用非合金钢和合金钢？4.d） EN 10263中规定的不锈钢？5.1.2本EN 10263第2、3和4部分涵盖直径不超过100 mm的产品。
第5部分涵盖直径不超过25 mm的产品:铁素体钢和奥氏体铁素体钢；奥氏体钢为50 mm；马氏体钢为100 mm。1.3在特殊情况下，买方和供应商可在询价和订购时商定与本欧洲标准有关的补充要求或偏差（见附录A）。1.4 EN 10021中的一般技术交付条件也适用于根据本欧洲标准供应的产品。
参考参考参考:EN 1007-7-2:1007 7-2:2009 2009年12 12 12:12 12 12:1 1:1:1 1:10 10 10 10 10 10 10 9 9 9 9:10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 9:10 10 10 10 10 10 10 10 10 10 10:10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10（ISO 14284 14284:1996 AS）ISO 642:1999ISO 643:2012 ED3EN ISO 377:2017EN 10263-3:2017ISO6892-1:2016ISO 4967:2013 ED3EN 10021:2006EN 10277-1:2008ISO 377:2017EN 10278:1999EN 10060:2003ISO 14284:
1996年（R06）EN 10218-2:1996ISO 9934-1:2016EN ISO 6892-1（ISO 6892-1:2016）EN 10108:2004EN 10263-2:2017EN 10168:2004EN 10088-1:2014CEN/TR 10261:2013EN 10017:2004购买本文件时可提供的所有当前修改件均包含在购买本文件中。

1.1 This part of EN 10263 specifies the general technical delivery conditions for round rod, round bars and wire for cold heading and cold extrusion made of:a) non alloy steels not intended for heat treatment after cold working, as specified in EN 10263?2;b) non alloy and alloy steels for case hardening, as specified in EN 10263?3;c) non alloy and alloy steels for quenching and tempering, as specified in EN 10263?4;d) stainless steels, as specified in EN 10263?5.1.2 Parts 2, 3 and 4 of this EN 10263 cover products having a diameter up to and including 100 mm.
Part 5 covers products having a diameter up to and including:25 mm for ferritic and austenitic-ferritic steels;50 mm for austenitic steels;100 mm for martensitic steels.1.3 In special cases supplementary requirements or deviations with respect to this European Standard may be agreed between the purchaser and the supplier at the time of enquiry and order (See Annex A).1.4 The general technical delivery conditions in EN 10021 also apply to products supplied in accordance with this European Standard.Cross References:EN 10027-2:2015ISO 3887:2003EN 10247:2007EN 10027-1:2016ISO 3651-2:1998EN 10263-5:2017EN 10263-4:2017EN 10020:1989ISO 6508-1:2016EN ISO 3651-2EN ISO 643EN ISO 4885EN ISO 3887EN ISO 642EN ISO 6508-1EN 10221:1995EN 10079:2007EN 10308:2001EN ISO 9934-1/A1 (ISO 9934-1:2001) ASEN 10204:2004EN ISO 14284 (ISO 14284:1996 AS)ISO 642:1999ISO 643:2012 ED3EN ISO 377:2017EN 10263-3:2017ISO 6892-1:2016ISO 4967:2013 ED3EN 10021:2006EN 10277-1:2008ISO 377:2017EN 10278:1999EN 10060:2003ISO 14284:1996 (R06)EN 10218-2:1996ISO 9934-1:2016EN ISO 6892-1 (ISO 6892-1:2016)EN 10108:2004EN 10263-2:2017EN 10168:2004EN 10088-1:2014CEN/TR 10261:2013EN 10017:2004All current amendments available at time of purchase are included with the purchase of this document.