前言:这是协调CSA集团和UL标准，适用于电动手持工具、可移动工具以及草坪和花园机械-安全-第2-6部分:手持锤子的特殊要求。它是CSA C22.2第62841-2-6号的第一版，也是UL 62841-2-6的第一版。本协调标准基于IEC出版物62841-2-6:第一版，电动手持式工具，可移动工具以及草坪和花园机械-安全-第2-6部分:手持式锤子的特殊要求，2020年7月发布。IEC出版物62841-2-6的版权归IEC所有。本协调标准由CSA集团和美国保险商实验室有限公司（UL）编制。国际协调委员会（IHC）为采用IEC系列标准而作出的努力和提供的支持- 感谢您使用手持、电动和可移动工具以及草坪和花园机械。本标准被认为适用于本标准规定范围内的合格评定。本标准由CSA手持式电动工具安全小组委员会审查，由CSA消费和商业产品技术委员会和CSA电气安全要求战略指导委员会管辖，并已由CSA技术委员会正式批准。本标准是根据加拿大标准委员会对加拿大国家标准的要求制定的。CSA集团已将其发布为加拿大国家标准。 范围第1部分的本条款适用，以下情况除外:补充:IEC 62841的本部分适用于手持式锤子。本文件涵盖的工具包括冲击锤和旋转锤，包括只能在冲击系统断开时旋转的旋转锤（仅限钻孔模式）。本文件不适用于钻机和冲击钻机。注101钻孔和冲击钻孔包含在IEC 62841-2-1中。本文件不适用于专门为驱动紧固件而设计的工具，如掌钉。

PrefaceThis is the harmonized CSA Group and UL standard for Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for handheld hammers. It is the First edition of CSA C22.2 No. 62841-2-6, and the First edition of UL 62841-2-6. This harmonized standard is based on IEC Publication 62841-2-6: First edition, Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 2-6: Particular requirements for hand-held hammers, issued July 2020. IEC publication 62841-2-6 is copyrighted by the IEC. This harmonized standard was prepared by CSA Group and Underwriters Laboratories Inc. (UL). The efforts and support of the International Harmonization Committee (IHC) for the adoption of the IEC series of Standards for Hand-Held, Motor-Operated, and Transportable Tools and Lawn and Garden Machinery are gratefully acknowledged. This standard is considered suitable for use for conformity assessment within the stated scope of the standard. This standard was reviewed by the CSA Subcommittee on Safety of Hand-Held Motor-Operated Electric Tools, under the jurisdiction of the CSA Technical Committee on Consumer and Commercial Products and the CSA Strategic Steering Committee on Requirements for Electrical Safety, and has been formally approved by the CSA Technical Committee. This standard has been developed in compliance with Standards Council of Canada requirements for National Standards of Canada. It has been published as a National Standard of Canada by CSA Group.ScopeThis clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to hand-held hammers. Tools covered by this document include percussion hammers and rotary hammers, including rotary hammers with the capability to rotate only with the percussion system disengaged (drill only mode). This document does not apply to drills and impact drills. NOTE 101 Drills and impact drills are covered by IEC 62841-2-1. This document does not apply to tools that are designed exclusively for driving fasteners, such as palm nailers.