SAE AMS4126D-经固溶和沉淀热处理的5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6）铝合金、模具和手工锻件及轧制环-国家数字标准馆

现行 SAE AMS4126D

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated 经固溶和沉淀热处理的5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6）铝合金、模具和手工锻件及轧制环

发布日期： 2019-08-01

本规范涵盖热处理时标称厚度小于等于4英寸（102mm）的模锻件形式的铝合金、锻造厚度小于等于6英寸（152mm）的手工锻件、壁厚小于等于3.5英寸（89mm）的轧制环以及任何尺寸的锻造或轧制环坯料（见8.6）。

This specification covers an aluminum alloy in the form of die forgings 4 inches (102 mm) and under in nominal thickness at time of heat treatment, hand forgings up to 6 inches (152 mm) incl, in as forged thickness, rolled rings with wall thickness up to 3.5 inches (89 mm) incl, and stock of any size for forging or rolled rings (see 8.6).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.24cr
铝合金手工锻件 5.6zn 2.5mg 1.6cu 0.24cr

Aluminum Alloy, Die and Hand Forgings 5.6zn 2.5mg 1.6cu 0.23cr Solution Heat Treated and Aged
铝合金、模具和手工锻件5.6zn 2.5mg 1.6cu 0.23cr固溶热处理和时效

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
铝和铝合金锻件手工锻件和轧制环锻件的标准规范

GB/T 32249-2015

铝及铝合金模锻件、自由锻件和轧制环形锻件通用技术条件
Aluminum and aluminum-alloy die forgings, hand forgings and rolled ring forgings—General specification

Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings (Metric)
铝和铝合金锻件手工锻件和轧制环锻件（公制）的标准规范

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7175-T74) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的5.6Zn-2.5Mg-1.6Cu-0.23Cr（7175-T74）铝合金模锻件和手锻件

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
铝合金、模具和手工锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T74）固溶热处理和时效

Aluminum Alloy, Die Forgings, 5.6zn 2.5mg 1.6cu 0.23cr Solution and Precipitation Heat Treated
铝合金模锻 5.6zn 2.5mg 1.6cu 0.23cr固溶和沉淀热处理

Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
固溶和沉淀热处理的铝合金模锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73）

Aluminum Alloy, Hand Forgings, 5.6zn 2.5mg 1.6cu 0.23cr, Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
铝合金、手工锻件、5.6zn 2.5mg 1.6cu 0.23cr、固溶热处理、应力消除和沉淀热处理

Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T651, 7075-T652) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、轧制或锻造环5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T651、7075-T652）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy, Rolled or Forged Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7351, 7075-T7352) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、轧制或锻造环5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T7351、7075-T7352）固溶热处理、机械应力消除和沉淀热处理

Aluminum Alloy, Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7452) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
铝合金手工锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T7452）固溶热处理、应力消除和沉淀热处理

Aluminum Alloy, Die and Hand Forgings, Rolled Rings, and Forging Stock 2.3Cu - 1.6Mg - 1.1Fe - 1.0Ni - 0.18Si - 0.07Ti (2618-T61) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的铝合金、模锻和手工锻件、轧制环和锻坯2.3Cu-1.6Mg-1.1Fe-1.0Ni-0.18Si-0.07Ti（2618-T61）

Aluminum Alloy Bars, Rods, and Wire Rolled or Cold Finished, and Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T651) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的轧制或冷加工铝合金棒材、棒材和线材以及5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6、7075-T651）环

Aluminum Alloy Die Forgings, and Rolled or Forged Rings 0.9Si - 0.62Mg - 0.25Cr (6151-T6) Solution and Precipitation Heat Treated (Stabilized: Nov 2014)
铝合金模锻件和轧制或锻造环0.9Si-0.62Mg-0.25Cr（6151-T6）固溶和沉淀热处理（稳定:2014年11月）

Aluminum Alloy, Hand Forgings and Rolled Rings 1.0mg 0.60si 0.28cu 0.20cr Solution Heat Treated, Stress Relieved By Compression, and Precipitation Heat Treated
铝合金、手工锻件和轧制环1.0mg 0.60si 0.28cu 0.20cr固溶热处理、压缩消除应力和沉淀热处理

Aluminum Alloy Hand Forgings and Rolled Rings 1.0Mg - 0.60Si - 0.28Cu - 0.20Cr (6061-T652) Solution Heat Treated, Stress Relief Compressed, and Precipitation Heat Treated
1.0Mg-0.60Si-0.28Cu-0.20Cr（6061-T652）固溶热处理、应力消除压缩和沉淀热处理的铝合金手工锻件和轧制环

Aluminum Alloy, Hand Forgings and Rolled Rings 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T852/T851) Solution Heat Treated, Mechanically Stress Relieved, and Precipitation Heat Treated
铝合金、手工锻件和轧制环6.3Cu-0.30Mn-0.18Zr-0.10V-0.06Ti（2219-T852/T851）固溶热处理、机械应力消除和沉淀热处理

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统