该文件规定了一种方法，确定最终需氧生物降解塑料材料在受控堆肥条件下，通过重量测量的二氧化碳量演变。该方法通过调节堆肥容器的湿度、通气量和温度来获得最佳的生物降解速率。该方法适用于以下材料:-天然和\/或合成聚合物和共聚物及其混合物；-含有增塑剂或着色剂等添加剂的塑料材料；-水溶性聚合物；-在试验条件下，不抑制接种物中微生物活性的材料。如果试验材料抑制接种物中的微生物，则可以使用另一种类型的成熟堆肥或预暴露堆肥。

This document specifies a method for determining the ultimate aerobic biodegradability of plastic materials under controlled composting conditions by gravimetric measurement of the amount of carbon dioxide evolved. The method is designed to yield an optimum rate of biodegradation by adjusting the humidity, aeration and temperature of the composting vessel. The method applies to the following materials: — natural and/or synthetic polymers and copolymers, and mixtures of these; — plastic materials that contain additives such as plasticizers or colorants; — water-soluble polymers; — materials that, under the test conditions, do not inhibit the activity of microorganisms present in the inoculum. If the test material inhibits microorganisms in the inoculum, another type of mature compost or pre-exposure compost can be used.