本标准适用于额定最大电压高于1 kV至38 kV的单极或多极交流开关，用于开关并联电容器组（见本条注释）。本标准涵盖了电容性负载切换的应用，其中电容性负载由足够的电感隔开，以将瞬态峰值涌流限制在表2和表3所示的峰值。根据本标准设计和制造的开关仅适用于电容性负载电流的常规切换。注——本标准旨在成为所有a？具体的杜提亚？开关在开关并联电容器组领域的应用，但其范围仅限于38 kV及以下。 但是，根据用户和制造商之间的协议，它可以用作其他额定电压的规范指南。

This standard applies to single- or multi-pole ac switches for rated maximum voltage above 1 kV to 38 kV for use in switching shunt capacitor banks (see the note in this clause). This standard covers the application of capacitive load switching wherein the capacitive loads are separated by sufficient inductance to limit the transient peak inrush current to the peak values shown in Table 2 and Table 3. Switches designed and built in accordance with this standard are rated for routine switching of capacitive load currents only. NOTE--This standard is intended to be a comprehensive standard for all "specific duty" applications of switches in the area of switching shunt capacitor banks, but it is limited in scope up to and including 38 kV. However, subject to agreement between the user and manufacturer, it may be used as a specification guide for other rated voltages.