现行

DIN VDE 0710-11

Specifications for lighting fittings with service voltages below 1000 V; Specification rules for flush-fitting signal-light fittings
工作电压低于1000 V的照明配件规范；嵌入式信号灯配件规范规则

1968-05-01

现行

BS 5655-7-1983

Lifts and service lifts-Specification for manual control devices, indicators and additional fittings
电梯和服务电梯 手动控制装置、指示器和附加配件规范

1983-10-31

现行

DIN VDE 0710-1

Specifications for lighting fittings with service voltages below 1000 V; General requirements
工作电压低于1000 V的照明配件规范；一般要求

1969-03-01

现行

ASTM A858/A858M-24

Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service
低温和腐蚀性环境用热处理碳钢配件标准规范

2024-07-01

现行

ASTM A420/A420M-24a

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
低温设备用锻制碳钢和合金钢管道配件的标准规范

2024-10-15

现行

PPI MAB-3 2019

Model Specification for PE 4710 Buried Potable Water Service, Distribution and Transmission Pipes and Fittings
PE 4710埋地饮用水供水、分配和输送管道及配件的型号规范

2019-01-01

现行

ASTM A234/A234M-24

Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
中高温用锻碳钢和合金钢管道配件标准规范

2024-04-01

现行

ASTM A774/A774M-24

Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures
低温和中等温度下一般腐蚀性使用的焊接锻造奥氏体不锈钢配件的标准规范

2024-03-01

现行

BS 3445-1-1992

Agricultural water troughs and water fittings-Specification for water trough bodies, service boxes and water supply system
农业水槽和供水设备

1992-01-31

现行

ASTM A989/A989M-23

Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
高温设备用热等静压合金钢法兰、配件、阀门和零件的标准规范

2023-05-01

现行

ASTM A988/A988M-23

Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service
高温设备用热等静压不锈钢法兰、配件、阀门和零件的标准规范

2023-05-01

现行

GB/T 34907-2017

稠油蒸汽热采井套管技术条件与适用性评价方法
Technical specifications and fitness for service evaluation method for thermal well casing under cyclic steam stimulation process

2017-11-01

现行

ASTM A694/A694M-16(2022)

Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service
高压传输设备用管法兰、管件、阀门和零件用碳素钢和合金钢锻件

2022-09-01

现行

ASTM A182/A182M-24c

Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
用于高温服务的锻制或轧制合金和不锈钢管法兰 锻制配件以及阀和零件的标准规范

2024-10-15

现行

ASTM A522/A522M-22

Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service
低温设备用锻造或轧制8%和9%镍合金钢法兰、配件、阀门和零件

2022-09-01

现行

ASTM B462-18e1

Standard Specification for Forged or Rolled Nickel Alloy Pipe Flanges, Forged Fittings, and Valves and Parts for Corrosive High-Temperature Service
腐蚀性高温设备用锻制或轧制镍合金管法兰、锻制配件、阀门和零件的标准规范

2018-11-01

现行

BS 5955-8-2001

Plastics pipework (thermoplastics materials)-Specification for the installation of thermoplastic pipes and associated fittings for use in domestic hot and cold services and heating systems in buildings
塑料管道工程（热塑性材料）

2001-10-22

现行

ASTM F3536-22

Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing
NPS 3或更小冷水设备用聚乙烯（PE）或交联聚乙烯（PEX）管或管用PE和PP机械配件的标准规范

2022-02-01

现行

ASTM A338-84(2022)

Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)
温度高达650℃的铁路、船舶和其他重型设备用可锻铸铁法兰、管件和阀门零件 华氏度（345 °C）

2022-10-01