SAE AMS4617A-铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73 7075-T73511 7075-T73510）固溶热处理必要时通过拉伸消除应力并过时效-国家数字标准馆

现行 SAE AMS4617A

到馆提醒

收藏跟踪

购买正版

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, 7075-T73511, 7075-T73510) Solution Heat Treated, Stress Relieved by Stretching when required, and Overaged 铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73 7075-T73511 7075-T73510）固溶热处理必要时通过拉伸消除应力并过时效

发布日期： 2017-04-03

SAE AMS4617A涵盖了挤压棒材、棒材、线材、型材和管材形式的铝合金，其标称直径或最小厚度为0.040至4.499英寸（1.01至114.27毫米），其面积高达32平方英寸（206平方厘米），包括0.040至4.499英寸（1.01至114.27毫米）（见8.5）。

SAE AMS4617A covers an aluminum alloy in the form of extruded bars, rods, wire, shapes, and tubing 0.040 to 4.499 inches (1.01 to 114.27 mm) inclusive, in nominal diameter or least thickness, and with areas up to 32 in2 (206 cm2), inclusive (see 8.5).

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution Heat Treated and Overaged
铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73）固溶热处理和过时效

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed
铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-O）退火

Aluminum Alloy Die Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
固溶和沉淀热处理的铝合金模锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73）

Aluminum Alloy, Flash Welded Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73) Solution and Precipitation Heat Treated
铝合金闪光焊环5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73）固溶和沉淀热处理

Aluminum Alloy Sheet and Plate, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr, 7075: (-T73 Sheet, -T7351 Plate), Solution Heat Treated and Overaged
铝合金薄板和板 5.6Zn-2.5Mg-1.6Cu-0.23Cr 7075:（-T73薄板 -T7351薄板）固溶热处理和过度时效

Aluminum Alloy, Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-O) Annealed, Fine Grained
铝合金薄板5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-O）退火细晶粒

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73511) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73511）固溶热处理拉伸消除应力过时效

Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr Annealed (7075-O) or, When Specified, “As Fabricated” (7075-F)
铝合金薄板和板材5.6Zn-2.5Mg-1.6Cu-0.23Cr退火（7075-O）或规定时“制造”（7075-F）

Aluminum Alloy, Alclad Sheet 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-0) Annealed, Fine Grained
铝合金 Alclad薄板5.6Zn-2.5Mg-1.6Cu-0.23Cr（Alclad 7075-0）退火细晶粒

Aluminum Alloy, Die and Hand Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T74) Solution Heat Treated and Aged
铝合金、模具和手工锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T74）固溶热处理和时效

Aluminum Alloy, Extrusions, 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6510) Solution Heat Treated, Stress Relieved by Stretching, and Precipitation Heat Treated, Unstraightened
挤压铝合金 5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6510）固溶热处理拉伸消除应力沉淀热处理非镀锌

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6511) Solution Heat Treated, Stress Relieved by Stretching, Straightened and Precipitation Heat Treated
铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6511）固溶热处理通过拉伸、矫直和沉淀热处理消除应力

Aluminum Alloy Forgings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T7352) Solution Heat Treated, Stress Relieved by Compression, and Overaged
铝合金锻件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T7352）固溶热处理通过压缩消除应力并过时效

Aluminum Alloy, Extrusions 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6, 7075-T6510, 7075-T6511) Solution Heat Treated, Stress Relieved by Stretching when Required and Precipitation Heat Treated
铝合金挤压件5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T67075-T65107075-T6511）固溶热处理必要时通过拉伸消除应力沉淀热处理

Aluminum Alloy, Rolled or Cold Finished Bars, Rods, and Wire 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T73, T7351) Solution Heat Treated, Stress Relieved by Stretching, and Overaged
铝合金、轧制或冷加工棒材、棒材和线材5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T73、T7351）固溶热处理、拉伸消除应力和过时效

Aluminum Alloy Sheet and Plate, Alclad 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (Alclad 7075-O) Annealed or when specified, “As Fabricated” (Alclad 7075-F)
铝合金薄板和板材 Alclad 5.6Zn-2.5Mg-1.6Cu-0.23Cr（Alclad 7075-O）退火或规定时 “制造”（Alclad7075-F）

Aluminum Alloy, Extruded Bar, Rod, and Shapes 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075-T76(51X) Solution Heat Treated and Overaged
铝合金、挤压棒材、棒材和型材5.6Zn-2.5Mg-1.6Cu-0.23Cr 7075-T76（51X）固溶热处理和过时效

Aluminum Alloy Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T6 Sheet, -T651 Plate) Solution and Precipitation Heat Treated
铝合金薄板和板材5.6Zn-2.5Mg-1.6Cu-0.23Cr7075:（-T6薄板 -T651薄板）固溶和沉淀热处理

Aluminum Alloy, Die and Hand Forgings and Rolled Rings 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr (7075-T6) Solution and Precipitation Heat Treated
经固溶和沉淀热处理的5.6Zn-2.5Mg-1.6Cu-0.23Cr（7075-T6）铝合金、模具和手工锻件及轧制环

Aluminum Alloy, Sheet and Plate 5.6Zn - 2.5Mg - 1.6Cu - 0.23Cr 7075: (-T76 Sheet, -T7651 Plate) Solution and Precipitation Heat Treated
铝合金薄板和板材5.6Zn-2.5Mg-1.6Cu-0.23Cr7075:（-T76薄板 -T7651薄板）固溶和沉淀热处理

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统