AS/NZS 4131:2010-压力管道和管件用聚乙烯（PE）化合物-国家数字标准馆

现行 AS/NZS 4131:2010

到馆阅读

收藏跟踪

购买正版

Polyethylene (PE) compounds for pressure pipes and fittings 压力管道和管件用聚乙烯（PE）化合物

发布日期： 2010-02-05

规定了适用于制造压力应用聚乙烯管道和管件的聚乙烯化合物（PE 80和PE 100）的要求。给出了材料、添加剂和长期压力性能的最低要求。

Specifies requirements for polyethylene compounds (PE 80 and PE 100) suitable for manufacturing polyethylene pipes and fittings for pressure applications. Minimum requirements are given for materials, additives and long-term pressure performance.

分类信息

发布单位或类别：澳大利亚-澳大利亚/新西兰标准

关联关系

研制信息

相似标准/计划/法规

AS/NZS 4129-2020

Fittings for polyethylene (PE) pipes for pressure applications
压力用聚乙烯（PE）管配件

AS/NZS 4129-2008

Fittings for polyethylene (PE) pipes for pressure applications
压力用聚乙烯（PE）管配件

Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
聚乙烯（PE）气体压力管、管材和配件标准规范

AS/NZS 4130-2018

Polyethylene (PE) pipes for pressure applications
压力应用用聚乙烯（PE）管

Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service
压力管道用电熔接聚乙烯（PE）管和配件的标准实施规程

JIS K 6770-2016

Crosslinked polyethylene (PE-X) pipe fittings
交联聚乙烯（PE-X）管件

Polyethylene (PE) Pressure Pipe Coil Dimensions
聚乙烯（PE）压力管盘管尺寸

Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
聚乙烯/铝/聚乙烯（PE-AL-PE）复合压力管标准规范

Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; fittings for resistance welding; dimensions
高密度聚乙烯（PE-HD）压力管道的管接头组件和配件；电阻焊配件；尺寸

GB/T 15820-1995

聚乙烯压力管材与管件连接的耐拉拔试验
Test of resistance to pull out ofjoints between polyethylene (PE) pressure pipes and fittings

Plastics. Polyethylene (PE) fabricated fittings for piping systems for water supply under pressure
塑料压力供水管道系统用聚乙烯（PE）装配配件

GB/T 40967-2021

核电厂用聚乙烯（PE）管材及管件
Polyethylene (PE) pipes and fittings for nuclear power plants

Pipe fittings and joints and assemblies for PE 80 and PE 100 polyethylene pressure pipes - Part 5: General quality requirements and testing
PE 80和PE 100聚乙烯压力管用管件、接头和组件第5部分:一般质量要求和试验

BS EN 12201-3-2011+A1-2012

Plastics piping systems for water supply, and for drainage and sewerage under pressure. Polyethylene (PE)-Fittings
供水、排水和污水加压用塑料管道系统聚乙烯（PE）

BS EN 12666-1-2005+A1-2011

Plastics piping systems for non-pressure underground drainage and sewerage. Polyethylene (PE)-Specifications for pipes, fittings and the system
无压地下排水和排污用塑料管道系统聚乙烯（PE）管道、配件和系统规范

JIS K 6788-2016

Crosslinked polyethylene (PE-X) pipe fittings for water supply
供水用交联聚乙烯（PE-X）管件

Pipe joint assemblies and fittings for high-density polyethylene (PE-HD) pressure pipes; injection-moulded fittings for butt welding; dimensions
高密度聚乙烯（PE-HD）压力管道的管接头组件和配件；对焊用注塑配件；尺寸

Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
聚乙烯（PE）塑料管和卡套管用对接热熔聚乙烯（聚乙烯）塑料配件的标准规范

AS 2492-2007[ Pending Revision ]

Cross-linked polyethylene (PE-X) pipes for pressure applications
压力应用用交联聚乙烯（PE-X）管

AS 2492-2007[ Pending Revision ]

Cross-linked polyethylene (PE-X) pipes for pressure applications
压力应用用交联聚乙烯（PE-X）管

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统