1.1 这些试验方法包括氧化亚铜和铜颜料的化学分析程序。 1.2 分析程序按以下顺序出现: 小节 铜总量 7. 氧化亚铜总还原力 8. 和 9 金属铜 10 和 11 氧化亚铜 12 氧化铜 13 铜以外的金属 14 – 16 氯化物和硫酸盐 17 和 18 丙酮可溶物 19 水 20 稳定性 21 粗颗粒 22 不溶于硝酸的粗颗粒 23 1.3 以国际单位制表示的数值应视为标准值。 本标准不包括其他计量单位。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 颜料生产商和涂料制造商使用本测试方法集进行过程控制、产品验收和研发。

1.1 These test methods cover procedures for the chemical analysis of cuprous oxide and copper pigments. 1.2 The analytical procedures appear in the following order: Sections Total Copper 7 Total Reducing Power as Cuprous Oxide 8 and 9 Metallic Copper 10 and 11 Cuprous Oxide 12 Cupric Oxide 13 Metals Other than Copper 14 – 16 Chlorides and Sulfates 17 and 18 Acetone-Soluble Matter 19 Water 20 Stability 21 Coarse Particles 22 Coarse Particles Insoluble in Nitric Acid 23 1.3 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This collection of test methods is used by pigment producers and paint manufacturers for process control, product acceptance, and research and development.