1.1 本规范涵盖了设计用于在链节围栏安装后插入链节织物中的聚合物隐私插入板条，以及在链节编织过程中将板条预插入链节网状物中的隐私链织物。 1.1.1 P-V型由聚乙烯隐私插入板条组成，在围栏安装后手动垂直插入标准网状链节织物中。 1.1.2 P-D型由聚乙烯隐私插入板条组成，在围栏安装后，将其对角编织成标准网状链节织物。 1.1.3 F-VDH型由改性玻璃纤维隐私插入板条组成，在围栏安装后，将其垂直、对角或水平编织成标准网状链节织物。 1.2 PI-V型由私密链节织物组成，其中包含在链节编织过程中预先插入链节网中的垂直高密度聚乙烯私密板条。 样式1a:更宽，2 3. / 8. 在里面[60.3毫米]至3英寸。[76.2 mm]板条，预先插入专门设计的较大网孔中。1b型:P-V型摩擦配合板条预插入标准2英寸。[50 mm]链节网。 1.3 以国际单位制或英磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等效值；因此，为了确保符合标准，每个系统应独立使用，两个系统的值不得组合。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers polymer privacy insert slats designed for insertion into chain link fabric after the chain link fence installation and privacy chain fabric having slats pre-inserted into chain link mesh during the chain link weaving process. 1.1.1 Type P-V consists of polyethylene privacy insert slats hand inserted vertically into standard mesh chain link fabric after the fence installation. 1.1.2 Type P-D consists of polyethylene privacy insert slats hand woven diagonally into standard mesh chain link fabric after the fence installation. 1.1.3 Type F-VDH consists of modified fiberglass privacy insert slats hand woven, vertically, diagonally or horizontally into standard mesh chain link fabric after the fence installation. 1.2 Type PI-V consists of privacy chain link fabric containing vertical high density polyethylene privacy slats pre-inserted into the chain link mesh during the chain link weaving process. Style 1a: Wider, 2 3 / 8 in. [60.3 mm] to 3 in. [76.2 mm] slats, pre-inserted into specially designed larger mesh. Style 1b: Type P-V friction fit slats pre-inserted into standard 2 in. [50 mm] chain link mesh. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.