BS EN 16584-2:2017描述了适用于以下情况的特定“PRM使用设计”要求: 基础设施和机车车辆以及对这些要求的评估。下面 适用于本标准:定义和要求描述了所需“PRM使用设计”的具体方面 由PRM TSI中定义的残疾人和行动不便者提供。本标准定义了对无障碍行驶普遍有效的要素 包括灯光、对比度、触觉反馈、视觉和听觉的传递 信息本标准的定义和要求涵盖基础设施和 机车车辆的应用。本标准仅涉及PRM乘客的无障碍性方面，未对其进行定义 与PRM无关的要求和定义。本标准假设基础设施或机车车辆处于其规定的运行状态 条件如果引用了最小或最大尺寸，则这些是绝对尺寸，而不是标称尺寸 要求。“一般要求”标准分为三部分:第1部分包含合同；本文件为第2部分，包含公开信息；书面信息；触觉信息；象形图；第三部分包含轻视； 低反射特性；透明的障碍；防滑性。交叉引用:EN 81-70:2003EN 16584-1:2017EN 16584-3EN 16585-1EN 16585-2:2017prEN 16587:2013EN 60268-16IEC 60286-16ISO 3864-1ISO 7000ISO 7001ISO 21542ETSI EN 301 462:2000第1300/2014ISO/TR 7239ISO 9186ISO 3864-4EN 14752EN 16585-3:2017prEN 16586-1:2013BREN 16586-2:2013BS 8300:2009+A1:2010DIN/3297008号欧盟委员会法规（EU）当前购买时可获得修订版包括在购买本文件时。

BS EN 16584-2:2017 describes the specific 'Design for PRM use' requirements applying to both infrastructure and rolling stock and the assessment of those requirements. The following applies to this standard:The definitions and requirements describe specific aspects of 'Design for PRM use' required by persons with disabilities and persons with reduced mobility as defined in the PRM TSI.This standard defines elements which are universally valid for obstacle free travelling including lighting, contrast, tactile feedback, transmission of visual and acoustic information. The definitions and requirements of this standard cover the infrastructure and the rolling stock applications.This standard only refers to aspects of accessibility for PRM passengers it does not define non PRM related requirements and definitions.This standard assumes that the infrastructure or rolling stock is in its defined operating condition.Where minimum or maximum dimensions are quoted these are absolute NOT nominal requirements.The 'General requirements' standard is written in three parts:Part 1 containscontrast;This document is Part 2 and containsspoken information;written information;tactile information;pictograms;Part 3 containslighting;low reflective properties;transparent obstacles;slip resistance.Cross References:EN 81-70:2003EN 16584-1:2017EN 16584-3EN 16585-1EN 16585-2:2017prEN 16587:2013EN 60268-16IEC 60286-16ISO 3864-1ISO 7000ISO 7001ISO 21542ETSI EN 301 462:2000Commission Regulation (EU) No 1300/2014ISO/TR 7239ISO 9186ISO 3864-4EN 14752EN 16585-3:2017prEN 16586-1:2013prEN 16586-2:2013BS 8300:2009+A1:2010DIN 329762008/57/ECAll current amendments available at time of purchase are included with the purchase of this document.