BS ISO 19207:2016规定了热喷涂粘合强度的分类方法 采用维氏硬度试验机在室温下进行涂层试验。这个国际标准 根据最大压痕力对粘合强度进行分类，称为粘合指数 无可见裂纹，适用于相对致密的金属涂层、陶瓷涂层和陶瓷涂层 金属陶瓷涂层。本国际标准可用于各涂层系统的比较。压痕法不建议用于非常薄和非常多孔的涂层，也不建议用于 粘结强度低于粘附强度的涂层系统。建议进行此测试 该方法可用于孔隙率小于约15%的涂层。交叉引用:ISO 6507-1ISO 6507-2ISO 14917ISO 14923购买时可用的所有现行修订版均包含在本文件的购买中。

BS ISO 19207:2016 specifies the classification method of adhesive strength for thermal spray coatings at room temperature by using Vickers hardness testing machine. This International Standard classifies the adhesive strength, called adhesion index, evaluated from the maximum indentation force without visible cracking, and it is applicable for relative dense metal coatings, ceramic coatings and cermet coatings. This International Standard can be used within comparison within each coating system.The indentation method is not recommended for very thin and very porous coatings and also for the coating system with lower cohesion strength than adhesion strength. It is recommended that this test method can be applied for a coating of which porosity is less than approximately 15 %.Cross References:ISO 6507-1ISO 6507-2ISO 14917ISO 14923All current amendments available at time of purchase are included with the purchase of this document.