本SAE标准适用于仅适用于SAE J2013中定义的军用战术轮式车辆的所有充气轮胎、车轮或放气装置的组合（仅适用于SAE J2013中的定义）。这适用于原始设备和新的更换轮胎、翻新轮胎、车轮或漏气设备。本文件描述了用于评估和测量轮胎/车轮/漏气系统以及车辆性能变化的测试和测试方法。对于每个轮胎/车轮/漏气总成，不需要进行本文件中包含的所有测试。政府轮胎工程办公室和车辆系统项目办公室负责选择要使用的特定试验。所选测试应限于评估轮胎/车轮/漏气系统和车辆性能变化所需的测试。 本规范的选定要求应作为采购军用战术轮式车辆轮胎、车轮和/或漏气装置的依据。

This SAE Standard applies to all combinations of pneumatic tires, wheels, or runflat devices (only as defined in SAE J2013) for military tactical wheeled vehicles only as defined in SAE J2013. This applies to original equipment and new replacement tires, retread tires, wheels, or runflat devices.This document describes tests and test methodology, which will be used to evaluate and measure tire/wheel/runflat system and changes in vehicle performance.All of the tests included in this document are not required for each tire/wheel/runflat assembly. The Government Tire Engineering Office and Program Office for the vehicle system have the responsibility for the selection of a specific test(s) to be used. The selected test(s) should be limited to that required to evaluate the tire/wheel/runflat system and changes in vehicle performance. Selected requirements of this specification shall be used as the basis for procurement of a tire, wheel, and/or runflat device for military tactical wheeled vehicles.