ISO 8041-1:20 17规定了设计用于测量振动值的仪器的性能规格和公差限值，以评估人体对振动的响应。它包括模式评估或验证、定期验证和现场检查的要求，以及现场检查的振动校准器规范。 本文件中规定的振动仪器可以是单个仪器、仪器的组合或基于计算机的采集和分析系统。 本文件中规定的振动仪器旨在测量一种或多种应用的振动，例如: -手动传递振动（参见ISO 5349？1）； -全身振动（参见ISO 2631？1、ISO 2631？2和ISO 2631？4）； -频率范围为0.1 Hz至0.5 Hz的低频全身振动（参见ISO 2631？1）。振动仪器可以被设计用于根据这些应用中的每一个中定义的一个或多个频率权重进行测量。 本文档中定义了三个级别的性能测试: a)模式评价或验证: 模式评估，即根据本文件中定义的规格对仪器进行全面测试； 一次性仪器的验证，即根据本文件中定义的相关规范对单个振动测量系统进行的有限组测试； b)定期验证，即旨在确保仪器保持在所需性能规格范围内的一组中间测试； c)现场检查，即指示仪器可能在要求的性能规格范围内运行所需的最低水平的测试。

ISO 8041-1:2017 specifies the performance specifications and tolerance limits for instruments designed to measure vibration values, for the purpose of assessing human response to vibration. It includes requirements for pattern evaluation, or validation, periodic verification and in situ checks, and the specification of vibration calibrators for in situ checks. Vibration instruments specified in this document can be single instruments, combinations of instrumentation or computer-based acquisition and analysis systems. Vibration instruments specified in this document are intended to measure vibration for one or more applications, such as the following: - hand-transmitted vibration (see ISO 5349？1); - whole-body vibration (see ISO 2631？1, ISO 2631？2 and ISO 2631？4); - low-frequency whole-body vibration in the frequency range from 0,1 Hz to 0,5 Hz (see ISO 2631？1). Vibration instruments can be designed for measurement according to one or more of the frequency weightings defined within each of these applications. Three levels of performance testing are defined in this document: a) pattern evaluation or validation:

1. pattern evaluation, i.e. a full test of the instrument against the specifications defined in this document;
2. validation of one-off instruments, i.e. a limited set of tests of an individual vibration measuring system against the relevant specifications defined in this document;

b) periodic verification, i.e. an intermediate set of tests designed to ensure that an instrument remains within the required performance specification; c) in situ checks, i.e. a minimum level of testing required to indicate that an instrument is likely to be functioning within the required performance specification.