BS EN 13166:2012+A2:2016规定了工厂制酚醛泡沫产品的要求，包括或 没有用于建筑物隔热的饰面或涂层。产品是 以板和层压板的形式制造。本标准涵盖的产品也用于预制隔热系统和 复合板；不包括包含这些产品的系统的性能。本标准描述了产品特性，包括测试、评估 符合性、标记和标签。本标准未规定产品所需达到的特定性能水平 证明在特定应用中的适用性。 给定应用程序所需的级别 可在法规或非冲突标准中找到。声明热阻低于0.40 m^2的产品。K/W或声明的热 本标准不包括10°C下大于0050 W/（m.K）的电导率。本标准不包括现场隔热产品、拟用于建筑设备和工业装置隔热的产品（由EN 14314[3]涵盖）。ISO 131822EN-120822EN ISO 121822EN:120822EN-120822EN:120822EN-120822EN:1206EN:120822EN:120822EN:120822EN:120822EN:120822EN:120822EN:1206EN:120822EN:120822EN:120822EN:120822EN:120822EN:120822EN:1206EN:120822EN:120822EN:120822EN:1206EN:120822EN:120822EN:1206EN:120822EN:120822EN:1202EN:120822EN:120822EN 2007ISO 9229:2007EN ISO 11925-2ISO 11925-2ISO 16269-6:2005ASTM D 3985EN 12090EN 14314EN ISO 10456ISO 10456包含以下内容:修订，2015年4月。修订并替换BS EN 13166:2012。修正案，2016年6月。修订并替换BS EN 13166:2012+A1:2015

BS EN 13166:2012+A2:2016 specifies the requirements for factory made phenolic foam products, with or without facings or coatings, which are used for the thermal insulation of buildings. The products are manufactured in the form of boards and laminates.Products covered by this standard are also used in prefabricated thermal insulation systems and composite panels; the performance of systems incorporating these products is not covered.This standard describes product characteristics and includes procedures for testing, evaluation of conformity, marking and labelling.This standard does not specify the required level of a given property to be achieved by a product to demonstrate fitness for purpose in a particular application. The levels required for a given application are to be found in regulations or non-conflicting standards.Products with a declared thermal resistance lower than 0,40 m^2.K/W or a declared thermal conductivity greater than 0,050 W/(m.K) at 10 °C are not covered by this standard.This standard does not cover in-situ thermal insulation products, products intended to be used for the thermal insulation of building equipment and industrial installations (covered by EN 14314 [3]).Cross References:EN 822EN 823EN 824EN 825EN 826EN 1602EN 1603EN 1604EN 1606EN 1607EN 1609EN 12086:1997EN 12087EN 12089:1997EN 12429EN 12667:2001EN 12939EN 13172:2012EN 13501-1EN 13820EN 13823EN 15715:2009EN ISO 1182ISO 1182EN ISO 1716ISO 1716EN ISO 4590ISO 4590EN ISO 9229:2007ISO 9229:2007EN ISO 11925-2ISO 11925-2ISO 16269-6:2005ASTM D 3985EN 12090EN 14314EN ISO 10456ISO 10456Incorporates the following:Amendment, April 2015. Amends and replaces BS EN 13166:2012. Amendment, June 2016. Amends and replaces BS EN 13166:2012+A1:2015