本SAE标准涵盖了用于高压液压管路和其他要求管材质量适合弯曲、双扩口、冷成型和钎焊的应用中的应力消除电阻焊闪光控制单壁高强度低合金钢管。根据本规范生产的材料不适用于单火炬应用，因为ID焊道可能导致泄漏路径。根据本规范生产的材料等级为微合金含量。ISO 10763和SAE J1065中列出了该管道的标称参考工作压力。 根据与该材料相关的特定几何形状和部件制成的钎焊和/或焊管组件配置可能需要按照ISO 19879进行鉴定试验。 冷成型管端配置通过不损害管材料的结构完整性避免了这种系统测试。 为了在全球市场内实现标准化，并确保公司在国际市场上保持竞争力，我们打算将其转换为公制管尺寸，这将: 通向一个全球体系 引导用户使用首选系统 降低复杂性 消除库存重复

This SAE Standard covers stress relieved electric resistance welded flash controlled single wall high strength low alloy steel tubing intended for use in high-pressure hydraulic lines and in other applications requiring tubing of a quality suitable for bending, double flaring,cold forming and brazing. Material produced to this specification is not intended to be used for single flare applications due to the potential leak path caused by the ID weld bead. The grade of material produced to this specification is of micro-alloy content. Nominal reference working pressures for this tubing are listed in ISO 10763 and SAE J1065. Brazed and/or welded tube assembly configurations made to specific geometry and components in association with this material may require qualification testing in accordance with ISO 19879. Cold forming the tube end configurations avoids this systemic testing by not compromising the structural integrity of the tube material. In an effort to standardize within a global marketplace and ensure that companies can remain competitive in an international market, it is the intent to convert to metric tube sizes, which will: Lead to one global system Guide users to preferred system Reduce complexity Eliminate inventory duplications