BS ISO 15118-5:2018规定了以抽象测试套件（ATS）形式进行的符合性测试 执行电动汽车或供电设备通信的被测系统（SUT） 控制器（EVCC或SECC），支持基于PLC的高级通信（HLC）和 符合ISO 15118-3的基本信号。这些一致性测试指定了功能测试 以及SUT的行为，以及根据一致性检查观察到的内容 ISO 15118-3中规定的要求以及实施者声明的SUT 实现的功能非常强大。ATS内的能力测试检查SUT的可观察能力是否符合要求 符合ISO 15118-3中定义的静态一致性要求。ATS的行为测试 在整个动态一致性范围内，尽可能彻底地检查实现 ISO 15118-3中定义的要求以及SUT能力范围内的要求。测试体系结构与ATS相对应。本部分中的一致性测试用例 利用该测试体系结构描述了该标准，并以TTCN-3核心语言指定 对于ISO/OSI物理层和数据链路层（第1层和第2层）。应用程序的一致性测试用例 ISO/OSI网络层（第3层）及以上描述见ISO 15118- 4.就覆盖范围而言，本文件仅涵盖ISO 15118中的规范性章节和要求？3.本文件还可包括参考标准要求的具体测试 （如IEEE或行业联盟标准），只要它们在以下方面相关: 符合ISO 15118-3的实施要求。然而，事实并非如此 旨在将本合规性规范的范围扩大到此类外部标准（如适用） 对于ISO 15118-3的一致性测试而言，在技术上没有必要。此外 本文件中规定的一致性测试不包括性能评估 也没有实现的健壮性或可靠性。他们无法提供对未来的判断 抽象服务原语的物理实现，系统如何实现，它如何提供 任何请求的服务，或协议实现的环境。此外，测试 本文档中定义的案例只考虑通信协议和系统的行为。 定义为ISO 15118-3。不考虑电动汽车供电设备和电动汽车之间的功率流。交叉引用:IEC 61851-1:2017ISO 15118-1:2013ISO 15118-2:2014ISO 15118-3:2015购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO 15118-5:2018 specifies conformance tests in the form of an Abstract Test Suite (ATS) for a System Under Test (SUT) implementing an Electric Vehicle or Supply Equipment Communication Controller (EVCC or SECC) with support for PLC-based High Level Communication (HLC) and Basic Signaling according to ISO 15118-3. These conformance tests specify the testing of capabilities and behaviors of an SUT, as well as checking what is observed against the conformance requirements specified in ISO 15118-3 and against what the implementer states the SUT implementation's capabilities are.The capability tests within the ATS check that the observable capabilities of the SUT are in accordance with the static conformance requirements defined in ISO 15118-3. The behavior tests of the ATS examine an implementation as thoroughly as is practical over the full range of dynamic conformance requirements defined in ISO 15118-3 and within the capabilities of the SUT.A test architecture is described in correspondence to the ATS. The conformance test cases in this part of the standard are described leveraging this test architecture and are specified in TTCN-3 Core Language for the ISO/OSI Physical and Data Link Layers (Layers 1 and 2). The conformance test cases for the ISO/OSI Network Layer (Layer 3) and above are described in ISO 15118-4.In terms of coverage, this document only covers normative sections and requirements in ISO 15118?3.This document can additionally include specific tests for requirements of referenced standards (e.g. IEEE, or industry consortia standards) as long as they are relevant in terms of conformance for implementations according to ISO 15118-3. However, it is explicitly not intended to widen the scope of this conformance specification to such external standards, if it is not technically necessary for the purpose of conformance testing for ISO 15118-3. Furthermore, the conformance tests specified in this document do not include the assessment of performance nor robustness or reliability of an implementation. They cannot provide judgments on the physical realization of abstract service primitives, how a system is implemented, how it provides any requested service, nor the environment of the protocol implementation. Furthermore, the test cases defined in this document only consider the communication protocol and the system's behavior defined ISO 15118-3. Power flow between the EVSE and the EV is not considered.Cross References:IEC 61851-1:2017ISO 15118-1:2013ISO 15118-2:2014ISO 15118-3:2015All current amendments available at time of purchase are included with the purchase of this document.