BS EN ISO 2081:2018规定了对铁或钢进行补充处理的镀锌层的要求。它包括买方提供给电镀机的信息，以及电镀前后的热处理要求。它不适用于以非制造形式涂覆在薄板、带材或钢丝上的锌涂层，用于封闭螺旋弹簧，或用于保护或装饰以外的目的。本文件未规定镀锌前母材表面状况的要求。 然而，基体金属表面的缺陷会对涂层的外观和性能产生不利影响。适用于螺纹部件的涂层厚度可能受到尺寸要求的限制，包括等级或配合。交叉引用:ISO 2080ISO 15330ISO 1463ISO 2819ISO 9227ISO 10587ISO 15724ISO 9587ISO 4519ISO 3613ISO 10289ISO 9588ISO 2064ISO 27831-2ISO 27830ISO 3497EN 10088-1ISO 4518ISO 27831-1ISO 3543ASTM E527ISO 2178 EN 573-2ISO 3892ISO 1461ISO 2177 CEN/TS 1338EN 1706ISO 19598购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN ISO 2081:2018 specifies requirements for electroplated coatings of zinc with supplementary treatments on iron or steel. It includes information to be supplied by the purchaser to the electroplater, and the requirements for heat treatment before and after electroplating.It is not applicable to zinc coatings appliedto sheet, strip or wire in the non-fabricated form,to close-coiled springs, orfor purposes other than protective or decorative.This document does not specify requirements for the surface condition of the basis metal prior to electroplating with zinc. However, defects in the surface of the basis metal can adversely affect the appearance and performance of the coating.The coating thickness that can be applied to threaded components can be limited by dimensional requirements, including class or fit.Cross References:ISO 2080ISO 15330ISO 1463ISO 2819ISO 9227ISO 10587ISO 15724ISO 9587ISO 4519ISO 3613ISO 10289ISO 9588ISO 2064ISO 27831-2ISO 27830ISO 3497EN 10088-1ISO 4518ISO 27831-1ISO 3543ASTM E527ISO 2178EN 573-2ISO 3892ISO 1461ISO 2177CEN/TS 13388EN 1706ISO 19598All current amendments available at time of purchase are included with the purchase of this document.