首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 IEC 61076-3-110:2016
到馆阅读
收藏跟踪
购买正版
Connectors for electronic equipment - Product requirements - Part 3-110: Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz 电子设备用连接器.产品要求.第3-110部分:频率达3000MHz的数据传输用自由和固定连接器的详细规范
发布日期: 2016-08-30
IEC 61076-3-110:2016本详细规范涵盖了3000 MHz以下频率的机械、电气和环境要求以及电气传输要求。这些连接器的传输要求专门针对特定的触点对,这些触点对与其他触点对分离,例如通过连接器内的单个对屏蔽。这些连接器与IEC 60603-7系列连接器相似,可相互配合使用。IEC 60603-7系列连接器通常用于ISO/IEC 11801平衡布线系统。ISO/IEC 11801平衡布线系统根据频率范围和基本布线组件类型按类别进行组织。 g.根据屏蔽配置。IEC 60603-7系列连接器的一个主要共同特征是与低频类别的向后兼容性。IEC 61076-3-110系列连接器与IEC 60603-7-7、IEC 60603-7-11和IEC 60603-7-82连接器向后兼容。IEC 61076-3-110系列连接器与某些IEC 60603-7系列连接器不向后兼容。 关键词:连接器,免费和固定数据传输,3000 MHz
IEC 61076-3-110:2016 This detail specification covers mechanical, electrical and environmental requirements and electrical transmission requirements for frequencies up to 3 000 MHz. These connector's transmission requirements are specifically intended for specific pairs of contacts, which are separated from the other pairs of contacts, such as by means of individual pair shields within the connector. These connectors are similar to, intermateable with, and intended to be used with the IEC 60603-7 series connectors. The IEC 60603-7 series connectors are typically used in ISO/IEC 11801 balanced cabling systems. The ISO/IEC 11801 balanced cabling systems are organized by categories according to frequency range and by basic cabling component types, e.g. according to shielding configurations. A primary common feature among the IEC 60603-7 series connectors is backward compatibility to lower frequency categories. The IEC 61076-3-110 series connectors are backward compatible with IEC 60603-7-7, IEC 60603-7-71 and IEC 60603-7-82 connectors. The IEC 61076-3-110 series connectors are not backward compatible with some IEC 60603-7 series connectors. Key words: Connectors, Free and Fixed Data Transmission, 3000 MHz
分类信息
关联关系
研制信息
归口单位: TC 48/SC 48B
相似标准/计划/法规
现行
IEC 61076-3-2008
Connectors for electronic equipment - Product requirements - Part 3: Rectangular connectors - Sectional specification
电子设备连接器 - 产品要求 - 第3部分:矩形连接器 - 分段规格
2008-07-09
现行
IEC 61076-3-001-2008
Connectors for electronic equipment - Product requirements - Part 3-001: Rectangular connectors - Blank detail specification
电子设备用连接器 产品要求 第3-001部分:矩形连接器 空白详细规范
2008-07-09
现行
IEC 61076-2-2011
Connectors for electronic equipment - Product requirements - Part 2: Sectional specification for circular connectors
电子设备用连接器 产品要求 第2部分:圆形连接器的分规范
2011-06-21
现行
IEC 61076-1-2006+AMD1-2019 CSV
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备用连接器.产品要求.第1部分:总规范
2019-01-11
现行
IEC 61076-1-2006
Connectors for electronic equipment - Product requirements - Part 1: Generic specification
电子设备连接器 - 产品要求 - 第1部分:通用规范
2006-04-27
现行
IEC 61076-2-001-2011
Connectors for electronic equipment - Product requirements - Part 2-001: Circular connectors - Blank detail specification
电子设备连接器 - 第2-001部分:圆形连接器 - 空白详细规格
2011-06-21
现行
IEC 61076-1-2006/AMD1-2019
Amendment 1 - Connectors for electronic equipment - Product requirements - Part 1: Generic specification
修改件1.电子设备用连接器.产品要求.第1部分:总规范
2019-01-11
现行
IEC 61076-3-118-2010
Connectors for electronic equipment - Product requirements - Part 3-118: Rectangular connectors - Detail specification for a 4 pole plus PE power connector with push-pull coupling
电子设备用连接器 产品要求 第3-118部分:矩形连接器 带推挽耦合的4极加PE电源连接器的详细规范
2010-04-26
现行
IEC 61076-2-105-2008
Connectors for electronic equipment - Product requirements - Part 2-105: Circular connectors - Detail specification for M5 connectors with screw-locking
电子设备连接器 - 产品要求 - 第2-105部分:圆形连接器 - 具有螺丝锁定功能的M5连接器的详细规格
2008-07-25
现行
IEC 60512-11-3-2002
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests - Test 11c: Damp heat, steady state
电子设备连接器 - 测试和测量 - 第11-3部分:气候测试 - 测试11C:潮湿热 稳定状态
2002-02-22
现行
JIS C 5402-11-3-2005
Connectors for electronic equipment -- Tests and measurements -- Part 11-3: Climatic tests -- Test 11c: Damp heat, steady state
电子设备连接器试验和测量第11-3部分:气候试验试验11c:湿热稳态
2005-01-01
现行
UNE-EN 60512-11-3-2002
Connectors for electronic equipment - Tests and measurements -- Part 11-3: Climatic tests - Test 11c: Damp heat, steady state.
电子设备用连接器.试验和测量.第11-3部分:气候试验.试验11c:稳态湿热
2002-12-16
现行
BS EN 61076-3-110-2016
Connectors for electronic equipment. Product requirements-Detail specification for free and fixed connectors for data transmission with frequencies up to 3 000 MHz
电子设备用连接器 产品要求
2016-12-31
现行
DIN EN 60512-11-3
Connectors for electronic equipment - Tests and measurements - Part 11-3: Climatic tests; Test 11c: Damp heat, steady state (IEC 60512-11-3:2002); German version EN 60512-11-3:2002
电子设备连接器.试验和测量.第11-3部分:气候试验;试验11c:稳态湿热(IEC 60512-11-3-2002);德文版EN 60512-11-3:2002
2003-01-01
现行
IEC 61076-3-126-2023
Connectors for electrical and electronic equipment - Product requirements - Part 3-126: Rectangular connectors - Detail specification for 5-way power connectors for industrial environments with push-pull locking
电气和电子设备用连接器.产品要求.第3-126部分:矩形连接器.具有推拉锁定的工业环境用5路电源连接器的详细规范
2023-01-31
现行
BS 09/30199993 DC
BS EN 61076-2. Connectors for electronic equipment. Product requirements. Part 2. Circular connectors. Sectional specification
英国标准EN 61076-2 电子设备用连接器 产品要求 第二部分 圆形连接器 分规范
2009-02-17
现行
IEC 61076-2-101-2024
Connectors for electrical and electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking
电气和电子设备用连接器 产品要求 第2-101部分:圆形连接器 带螺钉锁定的M12连接器的详细规范
2024-11-27
现行
IEC 61076-2-111-2017
Connectors for electrical and electronic equipment - Product requirements - Part 2-111: Circular connectors - Detail specification for power connectors with M12 screw-locking
电气和电子设备用连接器.产品要求.第2-111部分:圆形连接器.带M12螺纹锁紧的电源连接器的详细规范
2017-12-07
现行
IEC 61076-2-104-2014
Connectors for electronic equipment - Product requirements - Part 2-104: Circular connectors - Detail specification for circular connectors with M8 screw-locking or snap-locking
电子设备连接器 - 产品要求第2-104部分:圆形连接器 - 圆形连接器的详细规格 带m8螺丝锁定或卡扣锁定
2014-09-09
现行
IEC 61076-3-120-2016
Connectors for electronic equipment - Product requirements - Part 3-120: Rectangular connectors - Detail specification for rewirable power connectors with snap locking for rated voltage of 250 V d.c. and rated current of 30 A
电子设备连接器 - 产品要求第3-120部分:矩形连接器 - 具有250 V直流额定电压的快速锁定的可重复电源连接器的详细规范 额定电流30 a
2016-08-25