1.1 本规程是在氨水中制备碱溶性树脂溶液并测定此类溶液特性的程序。 1.2 以国际单位制表示的数值应视为标准值。本标准不包括其他计量单位。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本规程适用于所有类型的akalali可溶性树脂。树脂制造商应指定将使用的氢氧化铵百分比（基于树脂的当量）和用于获得溶液的最高温度。

1.1 This practice is a procedure for preparing solutions of alkali-soluble resins in aqueous ammonia and determining the characteristics of such solutions. 1.2 The values stated in SI units are to be regarded as standard. No other units of measurement are included in this standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This practice is suitable for all types of akalali-soluble resins. The resin manufacturer shall specify the percent ammonium hydroxide to be used (based on the equivalent weight of resin) and the maximum temperature to be used to achieve solution.