首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS PD ISO/TS 31657-1:2020
到馆提醒
收藏跟踪
购买正版
Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions-Calculation of multi-lobed and tilting pad journal bearings 滑动轴承 稳态条件下的流体动压滑动轴承
发布日期: 2020-07-09
本文件规定了计算的一般原则、假设和前提条件 多波瓣可倾瓦径向滑动轴承,通过基于 许多简化的假设。为了对该计算方法的结果进行可靠评估, 必须考虑这些假设的物理含义以及实用性。 例如,在实际机器上进行的温度测量的经验 典型操作条件。从这个意义上讲,本文提供了一种简单的预测方法 滑动轴承的近似性能适用于那些无法接触到更复杂和更复杂轴承的轴承 精确的计算技术。购买本文件时可获得的所有当前修订均包含在购买本文件中。
This document specifies the general principles, assumptions and preconditions for the calculation of multi-lobed and tilting-pad journal bearings by means of an easy-to-use calculation procedure based on numerous simplifying assumptions. For a reliable evaluation of the results of this calculation method, it is indispensable to consider the physical implications of these assumptions as well as practical experiences for instance from temperature measurements carried out on real machinery under typical operating conditions. Applied in this sense, this document presents a simple way to predict the approximate performance of plain journal bearings for those unable to access more complex and accurate calculation techniques.All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS PD ISO/TS 31657-2-2020
Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions-Functions for calculation of multilobed journal bearings
滑动轴承 稳态条件下的流体动压滑动轴承
2020-07-10
现行
BS PD ISO/TS 31657-3-2020
Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions-Functions for calculation of tilting pad journal bearings
滑动轴承 稳态条件下的流体动压滑动轴承
2020-07-01
现行
DIN 31657-2
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of multilobed journal bearings
滑动轴承.稳态条件下的流体动力滑动轴承.第2部分:多叶滑动轴承的计算函数
1996-03-01
现行
DIN 31652-1
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 1: Calculation of circular cylindrical bearings
滑动轴承.稳态条件下的流体动力滑动轴颈轴承.第1部分:圆柱轴承的计算
2017-01-01
现行
DIN 31657-3
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Functions for calculation of tilting pad journal bearings
滑动轴承.稳态条件下的流体动力滑动轴承.第3部分:可倾瓦滑动轴承的计算函数
1996-03-01
现行
ISO/TS 31657-3-2020
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 3: Functions for calculation of tilting pad journal bearings
普通轴承 - 稳态条件下的流体动力学平面轴承 - 第3部分:倾斜垫轴颈计算功能
2020-06-24
现行
ISO/TS 31657-2-2020
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 2: Functions for calculation of multi-lobed journal bearings
滑动轴承 - 稳态条件下的流体动力滑动轴颈轴承 - 第2部分:计算多叶轴颈轴承的功能
2020-06-10
现行
DIN 31652-2
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 2: Functions for calculation of circular cylindrical bearings
滑动轴承.稳态条件下的流体动力滑动轴颈轴承.第2部分:圆柱轴承的计算函数
2017-01-01
现行
KS B ISO 7902-1(2021 Confirm)
플레인 베어링 — 정상 상태 하의 플레인 저널 베어링 — 원형 원통형 베어링 —제1부: 계산 절차
滑动轴承.稳态条件下的流体动力滑动轴颈轴承.圆柱轴承.第1部分:计算程序
2016-12-21
现行
KS B ISO 7902-1
플레인 베어링 — 정상 상태에서의 동압 플레인 저널 베어링 — 원통형 베어링 — 제1부: 계산 절차
滑动轴承.稳态条件下的流体动力滑动轴颈轴承.圆柱轴承.第1部分:计算程序
2022-12-14
现行
KS B ISO 7902-1
플레인 베어링 — 정상 상태 하의 플레인 저널 베어링 — 원형 원통형 베어링 —제1부: 계산 절차
滑动轴承 - 稳态条件下液压滑动轴承 - 圆柱形轴承 - 第1部分:计算过程
2016-12-21
现行
ISO/TS 31657-1-2020
Plain bearings — Hydrodynamic plain journal bearings under steady-state conditions — Part 1: Calculation of multi-lobed and tilting pad journal bearings
滑动轴承 - 稳态条件下的流体动力滑动轴颈轴承 - 第1部分:多叶和倾斜垫片轴颈轴承的计算
2020-06-30
现行
BS ISO 7902-1-2020
Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings-Calculation procedure
稳态条件下的流体动压滑动轴承 圆柱轴承
2020-08-03
现行
DIN 31653-1
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of pad thrust bearings
滑动轴承;稳态条件下的流体动力滑动推力轴承;瓦推力轴承的计算
1991-05-01
现行
BS PD ISO/TS 31657-4-2020
Plain bearings. Hydrodynamic plain journal bearings under steady-state conditions-Permissible operational parameters for calculation of multi-lobed and tilting pad journal bearings
滑动轴承 稳态条件下的流体动压滑动轴承
2020-07-10
现行
DIN 31653-2
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; functions for calculation of pad thrust bearings
滑动轴承;稳态条件下的流体动力滑动推力轴承;瓦推力轴承的计算函数
1991-05-01
现行
BS ISO 12131-1-2020
Plain bearings. Hydrodynamic plain thrust pad bearings under steady-state conditions-Calculation of thrust pad bearings
滑动轴承 稳态条件下的流体动力滑动推力瓦轴承
2020-07-15
现行
DIN 31654-1
Plain bearings; hydrodynamic plain thrust bearings under steady-state conditions; calculation of tilting-pad thrust bearings
滑动轴承;稳态条件下的流体动力滑动推力轴承;可倾瓦推力轴承的计算
1991-05-01
现行
DIN 31652-3
Plain bearings - Hydrodynamic plain journal bearings under steady-state conditions - Part 3: Permissible operational parameters for calculation of circular cylindrical bearings
滑动轴承.稳态条件下的流体动力滑动轴颈轴承.第3部分:圆柱轴承计算的允许操作参数
2017-01-01
现行
BS ISO 7902-2-2020
Hydrodynamic plain journal bearings under steady-state conditions. Circular cylindrical bearings-Functions used in the calculation procedure
稳态条件下的流体动压滑动轴承 圆柱轴承
2020-06-09