IEC 61810-10:20 19，具有功能和安全方面，适用于具有高能力要求（如分断或短路能力）的机电初级继电器（非指定时间全有或全无继电器），类似于纳入低压设备。这些继电器可以具有特定的设计来熄灭触点之间的电弧（例如通过磁吹出），或者使用IEC 61810-1未涵盖的绝缘配合（例如通过充气触点室），或者需要IEC 61810-1未涵盖的安全评估（例如对于更高的负载）。 它定义了具有通用性能的高容量继电器的附加要求，这些继电器旨在用于智能电网、电动汽车和其他使用电池充电/放电开关的应用中，例如:？电能存储（EES）系统， ？太阳能光伏能源系统、 ？电动道路车辆（EV）和电动工业卡车， ？电力电子系统及设备、 ？二次电池和蓄电池， ？道路车辆。 通过指定的型式试验验证是否符合本标准的要求。

IEC 61810-10:2019, with functional and safety aspects, applies to electromechanical elementary relays (non-specified time all-or-nothing relays) with high capability requirements like breaking or short circuit capabilities and similar for incorporation into low-voltage equipment. These relays may have a specific design to extinguish the electric arc between contacts (e.g. by magnetic blow-out), or use an insulation coordination not covered by IEC 61810-1 (e.g. by gas filled contact chambers), or require safety assessments not covered by IEC 61810-1 (e.g. for higher loads).
It defines additional requirements for high-capacity relays with generic performance intended for use in applications in smart grids, electric vehicles and other applications where, for example, battery charge/discharge switching is used, such as:
？ electrical energy storage (EES) systems,
？ solar photovoltaic energy systems,
？ electric road vehicles (EV) and electric industrial trucks,
？ power electronic systems and equipment,
？ secondary cells and batteries,
？ road vehicles.
Compliance with the requirements of this standard is verified by the type tests indicated.