现行

GB/T 25497-2010

吸气剂气体吸放性能测试方法
Test methods for gas absorbency and release of getters

2010-12-01

现行

GB/T 8763-2020

非蒸散型吸气材料及制品吸气性能测试方法
Test methods for gas absorption characteristic of non-evaporation gettering materials and products

2020-06-02

现行

AS 2428.3-2004

Methods of testing smoke/heat release vents, Method 3: Determination of operating characteristics
烟雾/放热通风口的试验方法 方法3:工作特性的测定

2004-05-06

现行

GB/T 4339-2008

金属材料热膨胀特征参数的测定
Test methods for thermal expansion characteristic parameters of metallic materials

2008-10-10

现行

KS C 2608(2018 Confirm)

금속 저항 재료의 전기 저항. 온도 특성 시험 방법
电阻测试方法 的金属电阻材料温度特性

2013-10-30

现行

KS C 2608(2023 Confirm)

금속 저항 재료의 전기 저항. 온도 특성 시험 방법
金属电阻材料电阻温度特性试验方法

2013-10-30

现行

JIS C 2526-1994

Testing method for electrical resistance-temperature characteristics of metallic resistance materials
金属电阻材料电阻温度特性试验方法

1994-01-01

现行

GB/T 4067-1999

金属材料电阻温度特征参数的测定
Testing method for electrical resistance-temperature characteristic parameters of metallic materials

1999-11-01

现行

ASTM E251-20a

Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages
金属接合电阻应变片性能特性的标准测试方法

2020-06-01

现行

ASTM F140-98(2020)

Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
用旋光法制作标准玻璃金属对接密封件和膨胀特性试验的标准实施规程

2020-08-01

现行

ASTM F144-80(2019)

Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
用旋光法进行标准玻璃-金属夹层密封和膨胀特性试验的标准实施规程

2019-11-01

现行

IEC 61196-1-310-2005

Coaxial communication cables - Part 1-310: Mechanical test methods - Test for torsion characteristics of copper-clad metals
同轴通信电缆 - 第1-310部分:机械测试方法 - 铜包金属扭转特性试验

2005-07-27

现行

GB/T 17737.310-2018

同轴通信电缆 第1-310部分：机械试验方法 铜包金属的扭转特性试验
Coaxial communication cables—Part 1-310: Mechanical test methods—Test for torsion characteristics of copper-clad metals

2018-03-15

现行

GOST 25.506-1985

Расчеты и испытания на прочность. Методы механических испытаний металлов. Определение характеристик трещиностойкости (вязкости разрушения) при статическом нагружении
设计 计算和强度测试 金属机械试验方法静载荷下断裂韧性特性的测定

现行

BS ISO 15029-2-2018

Petroleum and related products. Determination of spray ignition characteristics of fire-resistant fluids-Spray test. Stabilised flame heat release method
石油及相关产品 耐火液体喷雾点火特性的测定

2018-04-24

现行

ASTM E1740-24

Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
用锥形量热计测定墙面覆盖层或天花板覆盖层复合材料的热释放率和其他耐火试验响应特性的标准试验方法

2024-10-01

现行

ASTM E1915-20

Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics
用于碳 硫和酸碱特性的金属轴承矿石和相关材料分析的标准测试方法

2020-07-01

现行

UNE 135312-2003

Vertical signs. Fixing systems for metallic plates, signals and directional signs type arrow. Characteristics and test methods.
垂直标志 金属板、信号和方向标志的固定系统 如箭头所示 特性和测试方法

2003-12-30

现行

ISO 15029-2-2018

Petroleum and related products — Determination of spray ignition characteristics of fire-resistant fluids — Part 2: Spray test — Stabilised flame heat release method
石油及相关产品 - 耐火流体喷雾点火特性的测定 - 第2部分:喷雾试验 - 稳定火焰放热法

2018-04-13

现行

UNE 135332-2005

Vertical signs. Plates, sheet slats and directional panels used for metallic signs and permanent signs. Materials. Characteristics and test methods.
垂直标志 金属标志和永久性标志用板材、板条和定向板 材料 特性和测试方法

2005-12-28