BS EN 16798-7:2017描述了计算建筑物通风空气流量的方法 用于能源计算、评估、热负荷和冷负荷。本欧洲标准适用于具有以下一个或多个特征的建筑:机械通风系统（机械排气、机械供气或平衡系统）；住宅和低层非住宅建筑的被动式管道通风系统；燃烧设备；窗户开口（手动或自动操作）；以及可直接烹饪的厨房（包括餐厅）。本欧洲标准适用于结合机械和被动风管的混合系统 住宅和低层非住宅建筑的通风系统。本欧洲标准适用于建筑高度小于100米的建筑和 垂直空气温差小于15K。标准提供的结果是:进入或离开通风区的空气流量； 以及机械通风系统（如有）需要分配的空气流量。本欧洲标准不适用于:带有厨房的建筑，厨房不能立即使用；以及工业过程通风的建筑。通风和气密性要求的定义（如室内空气质量、供暖和制冷、， 安全、消防等）不在本文件范围内。开窗的定义 本文档不包括场景。表1显示了本标准在环境保护局标准中的相对位置 模块化结构如prENISO 52000-1所述。注1:在prENISO/TR 52000-2中，可以找到相同的表格，每个模块的 已发布或正在编制的相关EPB标准和随附技术报告。注2:模块代表EPB标准，尽管一个EPB标准可能涵盖多个模块 一个模块可能包含在一个以上的EPB标准中，例如一个简化和详细的方法 分别地另见第2条和表A.1和B.1。交叉引用:EN 12792:2003EN 13141-5:2004EN 13141-1:2004EN 13141-2:2010ISO 7345:1987 CEN/TR 1749:2014ISO 15927-1:2003（R09）Ed 1CEN/TS 16629:2014CEN/TR 16798-8:2017CEN/TS 16628:2014EN ISO 15927-1（ISO 15927-1）以及购买本文件时可用的所有现行修订。

BS EN 16798-7:2017 describes the methods to calculate the ventilation air flow rates for buildings to be used for energy calculations evaluation, heating and cooling loads.This European Standard applies to buildings with one or more of the following characteristics:mechanical ventilation systems (mechanical exhaust, mechanical supply or balanced system);passive duct ventilation systems for residential and low-rise non-residential buildings;combustion appliances;window openings (manual or automatic operation); andkitchens where cooking is for immediate use (including restaurants).This European Standard is applicable to hybrid systems combining mechanical and passive duct ventilation systems in residential and low-rise non-residential buildings.This European Standard applies to buildings with a building height of less than 100 m and rooms where vertical air temperature difference is smaller than 15 K.The results provided by the standard are:the air flow rates entering or leaving a ventilation zone; andthe air flow rates required to be distributed by the mechanical ventilation system, if present.This European Standard is not applicable to:buildings with kitchens where cooking is not for immediate use; andbuildings with industry process ventilation.The definition of ventilation and airtightness requirements (as indoor air quality, heating and cooling, safety, fire protection, etc.) is not covered by this document. The definition of window opening scenarios is not covered by this document.Table 1 shows the relative position of this standard within the set of EPB standards in the context of the modular structure as set out in prENISO 52000-1.NOTE 1 In prENISO/TR 52000-2 the same table can be found, with, for each module, the numbers of the relevant EPB standards and accompanying technical reports that are published or in preparation.NOTE 2 The modules represent EPB standards, although one EPB standard might cover more than one module and one module might be covered by more than one EPB standard, for instance a simplified and a detailed method respectively. See also Clause 2 and Tables A.1 and B.1.Cross References:EN 12792:2003EN 13141-5:2004EN 13141-1:2004EN 13141-2:2010ISO 7345:1987 CEN/TR 1749:2014ISO 15927-1:2003 (R09) Ed 1CEN/TS 16629:2014CEN/TR 16798-8:2017CEN/TS 16628:2014EN ISO 15927-1(ISO 15927-1) ASAll current amendments available at time of purchase are included with the purchase of this document.