BS EN 16694:2015规定了测定六种选定多溴化物的方法 表1中列出的二苯醚（PBDE），代表工业溴化二苯醚 （BDE）以质量浓度存在于水样中≥ 每种同系物0025纳克/升。方法 使用固相萃取盘与气相色谱-质谱联用 光谱分析（GC-MS）。适用于含悬浮物地表水中多溴二苯醚的分析 颗粒物（SPM）高达500 mg/l（整个水样）、饮用水和地下水。这个 定量限（LOQ）根据ISO/TS 13530，在重复性基础上确定 在再现性条件下测定程序空白。该方法可用于分析表1中未列出的其他溴二苯醚同系物或其他类型的溴二苯醚 水然而，重要的是在使用前验证其适用性。交叉引用:EN ISO 3696ISO 3696EN ISO 5667-1ISO 5667-1EN ISO 5667-3ISO 5667-3ISO 8466-1EN 16377 EN ISO 22032ISO 22032EN ISO 22892ISO 22892ISO 5725-2ISO/TS 135302000/60/EC2008/105/EC2009/90/EC2013/39/EUSANCO/12571/2013购买本文件时提供的所有当前修订版。

BS EN 16694:2015 specifies a method for the determination of six selected polybrominated diphenyl ethers (PBDE) listed in Table 1, representative for technical brominated diphenyl ethers (BDE) in water samples in mass concentrations ≥ 0,025 ng/l for each individual congener. The method uses solid-phase extraction with SPE-disks in combination with gas chromatography-mass spectrometry (GC-MS). It is applicable to the analysis of PBDE in surface water containing suspended particulate matter (SPM) up to 500 mg/l (whole water samples), drinking water and groundwater. The limit of quantification (LOQ) was determined according to ISO/TS 13530, on the basis of replicate determinations of the procedural blank, carried out under reproducibility conditions.This method may be used for the analysis of other BDE congeners not listed in Table 1 or other types of water. However, it is important to verify its applicability before use.Cross References:EN ISO 3696ISO 3696EN ISO 5667-1ISO 5667-1EN ISO 5667-3ISO 5667-3ISO 8466-1EN 16377EN ISO 22032ISO 22032EN ISO 22892ISO 22892ISO 5725-2ISO/TS 135302000/60/EC2008/105/EC2009/90/EC2013/39/EUSANCO/12571/2013All current amendments available at time of purchase are included with the purchase of this document.