现行

SY/T 7608-2020

地下水封洞库水幕给水技术规范
Water supply technical specification of underground water-sealed cavern water curtain

2020-10-23

现行

SY/T 7486-2020

地下水封洞库工程物探规程
Specifications for engineering geophysical exploration of underground water-sealed cavern

2020-10-23

现行

JB/T 8126.4-2014

内燃机 冷却水泵 第4部分：水封 技术条件
Internal combustion engines - Cooling water pumps - Part 4:Seals - Specification

2014-05-06

现行

KS M ISO 4633

고무 씰 — 급수, 배수 및 하수 배관용 조인트 링 — 재료 요구사항
橡胶密封件 - 供水 排水和污水管道接头环 - 材料规格

2018-12-28

现行

DL/T 5812-2020

水电水利工程导流隧洞及导流底孔封堵施工规范
Specification of diversion tunnel and bottom out1et seal construction for hydropower and water conservancy englneerlng

2020-10-23

现行

ISO 4633-2023

Rubber seals — Joint rings for water supply, drainage and sewerage pipelines — Specification for materials
橡胶密封给水、排水和污水管道用连接环材料规范

2023-08-31

现行

GB/T 21873-2008

橡胶密封件 给、排水管及污水管道用接口密封圈 材料规范
Rubber seals - Joint rings for water supply, drainage and sewerage pipelines - Specification for materials

2008-05-14

现行

HG/T 3091-2000

橡胶密封件－给、排水管及污水管道用接口密封圈－材料规范
Rubber seals-Joint rings for water supply,drainage and sewerage pipelines-Specification for materials

2000-05-23

现行

KS M ISO 4633(2023 Confirm)

고무 씰 — 급수, 배수 및 하수 배관용 조인트 링 — 재료 요구사항
橡胶密封给水、排水和污水管道用连接环材料规范

2018-12-28

现行

KS M ISO 9631

고무 씰 — 110 ℃ 이하의 온수 공급 파이 프라인에 사용되는 접합부 링 — 재료에 대한 요구사항
橡胶密封件.110℃以下热水供应管道用连接环.材料规范

2018-12-28

现行

KS M ISO 9631

고무 씰 — 110 ℃ 이하의 온수 공급 파이프라인에 사용되는 접합부 링 — 재료에 대한 요구사항
橡胶密封110℃以下热水供应管道用连接环材料规范

2023-12-11

现行

GB/T 27572-2011

橡胶密封件 110℃热水供应管道的管接口密封圈 材料规范
Rubber seals - Joint rings for pipelines for hot-water supply up to 110℃ - Specification for the materials

2011-12-05

现行

BS ISO 9631-2018

Rubber seals. Joint rings for pipelines for hot-water supply up to 110 °C. Specification for the material
橡胶密封件 110℃以下热水供应管道的连接环.材料规范

2018-03-14

现行

ISO 9631-2018

Rubber seals — Joint rings for pipelines for hot-water supply up to 110 °C — Specification for the material
橡胶密封件-110度及以下热水供应管道的连接环；C-材料规范

2018-03-06

现行

MIL MIL-B-5423C Notice 1-Validation 1

BOOTS, DUST AND WATER SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR
防尘套和水封（用于拨动开关和按钮开关断路器和旋转驱动部件）通用规范

1987-07-02

现行

MIL MIL-B-5423C Amendment 1

BOOTS, DUST AND WATER SEAL (FOR TOGGLE AND PUSH-BUTTON SWITCHES, CIRCUIT BREAKERS, AND ROTARY-ACTUATED PARTS), GENERAL SPECIFICATION FOR
防尘和水封防尘套（用于拨动开关和按钮开关、断路器和旋转驱动部件）通用规范

1996-05-17

现行

NB/T 20478.2-2018

压水堆核电厂反应堆压力容器密封环技术规范 第2部分：C型密封环
The technical specification for reactor pressure vessel sealing ring of pressurized water reactor nuclear power plants-Part 2:C-ring

2018-03-22

现行

NB/T 20478.1-2018

压水堆核电厂反应堆压力容器密封环技术规范 第1部分：O型密封环
The technical specification of reactor pressure vessel sealing ring for pressurized water reactor nuclear power plan-Part 1:O-ring

2018-03-22

现行

MIL MIL-S-7916D Notice 1-Cancellation

SEALING COMPOUND,THREAD, GASKET,FUEL,OIL,WATER RESISTANT (REFER TO SOCIETY OF AUTOMOTIVE ENGINEERS(SAE)AEROSPACE MATERIAL SPECIFICATIONS(AMS)SAE-AMS-S-7916A)(S/S BY SAE-AMS-S-7916A)(SUPERSEDING MIL-S-7916C)
耐燃油、耐油、防水的螺纹、垫圈密封剂（参考美国汽车工程师协会航空航天材料规范SAE-AMS-S-7916A）

1997-11-15

现行

MIL MIL-S-7916D

SEALING COMPOUND,THREAD, GASKET,FUEL,OIL,WATER RESISTANT (REFER TO SOCIETY OF AUTOMOTIVE ENGINEERS(SAE)AEROSPACE MATERIAL SPECIFICATIONS(AMS)SAE-AMS-S-7916A)(S/S BY SAE-AMS-S-7916A)(SUPERSEDING MIL-S-7916C)
密封化合物、螺纹、垫片、燃料、油、防水（参考美国汽车工程师学会（SAE）航空航天材料规范（AMS）SAE-AMS-S-7916A）（由SAE-AMS-S-7916A提供）（取代MIL-S-7916C）

1994-06-28