ISO 19085-10:2018给出了可移动建筑工地锯的安全要求和措施，设计用于切割木材和具有类似木材物理特性的材料，以下简称“机器”。 注1:关于可置换机器的定义，参见ISO 19085-1:2017，3.5。 ISO 19085-10:2018涉及第4条所列的与机器相关的所有重大危险、危险情况和事件，包括在制造商预期的条件下操作、调整和维护时，包括合理可预见的误用。此外，还考虑了运输、组装、拆卸、禁用和报废阶段。 注2:相关但非重大危险，例如:。 机架的锐边，见ISO 12100:2010。 该机器还可以安装一个装置，用于通过工作台手动提升和降低锯片，其危险已得到处理。 本文件不适用于以下情况: a） 最大锯片直径小于350 mm或大于500 mm的机器； b） 手持式木工机械，包括允许其在不同模式下使用的任何改装，即台式安装； c） 带有倾斜锯片进行角度切割装置的机器、具有一个以上锯片转速的机器以及配备滑动台的机器； 注3:手持式电动工具包括在IEC 62841-1和IEC 62841-2-5中。 注4带有倾斜锯片进行角度切割装置的机器、具有一个以上锯片转速的机器以及配备滑动工作台的机器被视为台式锯，符合ISO 19085-9的规定。 ISO 19085-10:2018不适用于在潜在爆炸性环境中使用的机器，或在其发布日期之前制造的机器。

ISO 19085-10:2018 gives the safety requirements and measures for displaceable building site saws, designed to cut wood and materials with similar physical characteristics to wood, hereinafter referred to as "machines". NOTE 1 For the definition of displaceable machine, see ISO 19085？1:2017, 3.5. ISO 19085-10:2018 deals with all significant hazards, hazardous situations and events as listed in Clause 4, relevant to the machines, when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer including reasonably foreseeable misuse. Also, transport, assembly, dismantling, disabling and scrapping phases have been taken into account. NOTE 2 For relevant but not significant hazards, e.g. sharp edges of the machine frame, see ISO 12100:2010. The machine can also be fitted with a device for the saw blade to be manually raised and lowered through the table, whose hazards have been dealt with. This document does not apply to the following: a) machines with a maximum saw blade diameter smaller than 350 mm or greater than 500 mm; b) hand-held woodworking machines, including any adaptation permitting their use in a different mode, i.e. bench mounting; c) machines with a device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table; NOTE 3 Hand-held motor-operated electric tools are covered by IEC 62841？1 together with IEC 62841？2？5. NOTE 4 Machines with the device to tilt the saw blade for angle cutting, machines with more than one saw blade rotational speed and machines equipped with a sliding table are considered as table saws, covered by ISO 19085？9. ISO 19085-10:2018 is not applicable to machines intended for use in potentially explosive atmospheres or to machines manufactured prior to the date of its publication.