现行

ISO 3211-2018

Anodizing of aluminium and its alloys — Assessment of resistance of anodic oxidation coatings to cracking by deformation
铝及其合金的阳极氧化 - 阳极氧化涂层对变形破裂的抗性评估

2018-11-28

现行

JIS H 8684-2013

Anodizing of aluminium and its alloys -- Assessment of resistance of anodic oxidation coatings to cracking by deformation
GB/T-铝及铝合金阳极氧化阳极氧化膜耐变形开裂性的评定

2013-01-01

现行

ISO 8251-2018

Anodizing of aluminium and its alloys — Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金阳极氧化 - 阳极氧化涂层的耐磨性测量

2018-08-08

现行

BS EN ISO 8251-2018

Anodizing of aluminium and its alloys. Measurement of abrasion resistance of anodic oxidation coatings
铝及其合金的阳极氧化 阳极氧化膜耐磨性的测定

2018-09-20

现行

ISO 23052-2020

Anodizing of aluminium and its alloys — Test method for chemical resistance of anodic oxidation coatings on aluminium and its alloys using electromotive force apparatus
铝及铝合金阳极氧化用电动势仪测定铝及其合金阳极氧化层耐化学腐蚀性的试验方法

2020-09-10

现行

ISO 2931-2017

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化 - 通过测量导纳度评估密封阳极氧化涂层的质量

2017-12-04

现行

BS EN ISO 2931-2018

Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of admittance
铝及其合金的阳极氧化 通过导纳测量评估密封阳极氧化涂层的质量

2018-02-21

现行

UNE-EN 12373-15-2001

Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation.
铝和铝合金.阳极氧化.第15部分:阳极氧化涂层抗变形开裂性的评定

2001-02-28

现行

JIS H 8683-3-2013

Anodizing of aluminium and its alloys -- Assessment of quality of sealed anodic oxidation coatings -- Part 3: Measurement of admittance
铝及铝合金阳极氧化密封阳极氧化膜质量的评定第3部分:导纳的测量

2013-01-01

现行

JIS H 8682-2-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 2: Abrasive jet abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测量第2部分:磨料喷射耐磨性试验

2013-01-01

现行

JIS H 8682-3-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 3: Falling sand abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测定第3部分:耐落砂耐磨性试验

2013-01-01

现行

JIS H 8682-1-2013

Anodizing of aluminium and its alloys -- Measurement of abrasion resistance of anodic oxidation coatings -- Part 1: Abrasive-wheel-wear abrasion resistance test
铝及铝合金阳极氧化阳极氧化膜耐磨性的测定第1部分:砂轮耐磨性试验

2013-01-01

现行

ISO 3210-2017

Anodizing of aluminium and its alloys — Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
铝及其合金的阳极氧化 - 通过测量浸渍在磷酸/铬酸溶液中的质量损失来评估密封阳极氧化涂层的质量

2017-10-30

现行

BS EN ISO 3210-2017

Anodizing of aluminium and its alloys. Assessment of quality of sealed anodic oxidation coatings by measurement of the loss of mass after immersion in acid solution(s)
铝及其合金的阳极氧化 通过测量浸入酸溶液后的质量损失来评估密封阳极氧化涂层的质量

2018-01-26

现行

BS ISO 18771-2019

Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abrasive paper
铝及其合金的阳极氧化 用玻璃涂层砂纸测试表面耐磨性的方法

2019-02-07

现行

BS EN ISO 18771-2020

Anodizing of aluminium and its alloys. Method to test the surface abrasion resistance using glass-coated abrasive paper
铝及其合金的阳极氧化 用玻璃涂层砂纸测试表面耐磨性的方法

2020-09-25

现行

ISO 18771-2019

Anodizing of aluminium and its alloys — Method to test the surface abrasion resistance using glass-coated abrasive paper
铝及其合金的阳极氧化.用玻璃涂层砂纸测试表面耐磨性的方法

2019-02-05

现行

DIN EN 12373-15

Aluminium and aluminium alloys - Anodizing - Part 15: Assessment of resistance of anodic oxidation coatings to cracking by deformation; English version of DIN EN 12373-15
铝和铝合金.阳极氧化.第15部分:阳极氧化涂层耐变形开裂性的评定；DIN EN 12373-15的英文版

2000-12-01

现行

GB/T 8753.1-2017

铝及铝合金阳极氧化 氧化膜封孔质量的评定方法 第1部分：酸浸蚀失重法
Anodizing of aluminium and its alloys—Assessment of quality of sealed anodic oxidation coatings—Part 1：Measurement of the loss of mass after immersion in acid solution(s)

2017-05-31

现行

GB/T 12967.5-2022

铝及铝合金阳极氧化膜及有机聚合物膜检测方法 第5部分：抗破裂性的测定
Test methods for anodic oxidation coatings and organic polymer coatings on aluminium and aluminium alloys—Part 5:Assessment of resistance to cracking

2022-03-09