AS ISO 6993.3-2007-气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统第3部分:最大工作压力为1bar（100kPa）的管件和鞍座-国家数字标准馆

现行 AS ISO 6993.3-2007

到馆阅读

收藏跟踪

购买正版

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa) 气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统第3部分:最大工作压力为1bar（100kPa）的管件和鞍座

发布日期： 2007-07-12

采用ISO 6993-3:2006，其中规定了高抗冲聚氯乙烯（PVC-HI）制成的全端承载配件的要求，该配件用于通过工作温度范围为0摄氏度至+30摄氏度（含+30摄氏度）且最大工作压力为1毫巴（100千帕）的埋地管道供应气体燃料。

Adopts ISO 6993-3:2006, which specifies the requirements for full-end load-bearing fittings made of high-impact poly(vinyl chloride) (PVC-HI) intended to be used for the supply of gaseous fuels through buried pipelines having an operating temperature range of 0 degrees Celsius up to and including +30 degrees Celsius and a maximum operating pressure of 1 mbar (100 kPa).

分类信息

发布单位或类别：澳大利亚-澳大利亚标准

关联关系

研制信息

相似标准/计划/法规

BS ISO 4433-3-1997

Thermoplastic pipes. Resistance to liquid chemicals. Classification-Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly(vinyl chloride) (PVC-HI) and chlorinated poly(vinyl chloride) (PVC-C) pipes
热塑性塑料管耐液体化学物质分类未增塑聚氯乙烯（PVC-U）、高抗冲聚氯乙烯（PVC-HI）和氯化聚氯乙烯（PVC-C）管道

BS EN ISO 6259-2-2020

Thermoplastics pipes. Determination of tensile properties-Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly (vinyl chloride) (PVC-HI)
热塑性塑料管拉伸性能的测定

KS M ISO 6259-2(2018 Confirm)

열가소성 플라스틱 관 - 인장성의 측정 - 제2부 : 무가소화 폴리염화비닐(PVc-U), 염소화 폴리염화 비닐(PVC-C), 내충격성 폴리염화비닐(PVC-HI)관
热塑性塑料管材拉伸性能的测定第2部分:未增塑聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）和高抗冲聚氯乙烯（PVC-HI）管材

GB/T 8804.2-2003

热塑性塑料管材拉伸性能测定第2部分: 硬聚氯乙烯（PVC-U）、氯化聚氯乙烯（PVC-C）和高抗冲聚氯乙烯（PVC-HI）管材
Thermoplastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U)，chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)

ISO 4433-3-1997

Thermoplastics pipes — Resistance to liquid chemicals — Classification — Part 3: Unplasticized poly(vinyl chloride) (PVC-U), high-impact poly (vinyl chloride) (PVC-HI) and chlorinated poly (vinyl chloride) (PVC-C) pipes
热塑性塑料管——耐液体化学品——分类第3部分:未增塑聚氯乙烯（PVC-U）、高抗冲聚氯乙烯（PVC-HI）和氯化聚氯乙烯（PVC-C）管

KS M ISO 6259-2

열가소성 플라스틱 관 — 인장성의 측정 — 제2부: 무가소화 폴리염화비닐(PVC-U), 배향된 무가소화 폴리염화비닐(PVC-O), 염소화 폴리염화비닐(PVC-C), 내충격성 폴리염화비닐(PVC-HI) 관
热塑性塑料管.拉伸性能的测定.第2部分:未增塑聚氯乙烯（PVC-U）、定向未增塑氯乙烯（PVC-O）、氯化聚氯乙烯（PVC-C）和高抗冲聚氯乙烯（PVC-HI）制管

ISO 6259-2-2020

Thermoplastics pipes — Determination of tensile properties — Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI)
热塑性塑料管材拉伸性能的测定第2部分:未增塑聚氯乙烯（PVC-U）、定向未增塑聚氯乙烯（PVC-O）、氯化聚氯乙烯（PVC-C）和高冲击聚氯乙烯（PVC-HI）管材

BS EN ISO 2507-2-2017

Thermoplastics pipes and fittings. Vicat softening temperature-Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
热塑性塑料管和配件维卡软化温度未增塑聚氯乙烯（PVC-U）或氯化聚氯乙烯（PVC-C）管道和配件以及高抗冲击聚氯乙烯（PVC-HI）管道的试验条件

ISO 6993-4-2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 4: Code of practice for design, handling and installation
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统Spart 4:设计、搬运和安装实施规程

KS M ISO 2507-2(2020 Confirm)

열가소성 플라스틱 관 및 이음관－ 비카트 연화 온도－제2부：무가소화 폴리염화비닐(PVC－U), 염소화 폴리염화비닐(PVC－C) 관 및 이음관, 내충격성 폴리염화비닐(PVC－HI) 관에 대한 시험 조건
热塑性塑料管道和配件－维卡软化温度？第2部分:高抗冲击聚氯乙烯（PVC－HI）管用未增塑聚氯乙烯（PVC－U）或氯化聚氯乙烯（PVC－C）管及配件的试验条件

ISO 2507-2-1995

Thermoplastics pipes and fittings — Vicat softening temperature — Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (PVC-HI) pipes
热塑性塑料管道和配件——维卡软化温度第2部分:未增塑聚氯乙烯（PVC-U）或氯化聚氯乙烯（PVC-C）管道和配件以及高抗冲击聚氯乙烯（PVC-HI）管道的试验条件

DIN EN ISO 6259-2

Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride) (PVC-O), chlorinated poly(vinyl chloride) (PVC-C) and high-impact poly(vinyl chloride) (PVC-HI) (ISO 6259-2:2020)
热塑性塑料管拉伸性能的测定第2部分:由未增塑聚氯乙烯（PVC-U）、定向未增塑聚氯乙烯（PVC-O）、氯化聚氯乙烯（PVC-C）和高抗冲聚氯乙烯（PVC-HI）制成的管；德文版

ISO 6993-1-2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa)
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统Spart 1:最大工作压力为1 bar（100 kPa）的管道

AS ISO 6993.2-2007

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统第2部分:最大工作压力为200毫巴（20千帕）的管件

ISO 6993-2-2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 2: Fittings for a maximum operating pressure of 200 mbar (20 kPa)
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统Spart 2:最大工作压力为200 mbar（20 kPa）的管件

DIN EN ISO 2507-2

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC-HI) pipes (ISO 2507-2:1995)
热塑性塑料管和配件维卡软化温度第2部分:未增塑聚氯乙烯（PVC-U）或氯化聚氯乙烯（PVC-C）管和配件及高抗冲击聚氯乙烯（PVC-HI）管的试验条件

ISO 6993-3-2006

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels — Part 3: Fittings and saddles for a maximum operating pressure of 1 bar (100 kPa)
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统Spart 3:最大工作压力为1 bar（100 kPa）的配件和鞍座

AS ISO 6993.1-2007

Buried, high-impact poly(vinyl chloride) (PVC-HI) piping systems for the supply of gaseous fuels, Part 1: Pipes for a maximum operating pressure of 1 bar (100 kPa) (ISO 6993-1:2006, MOD)
气体燃料供应用埋地高冲击聚氯乙烯（PVC-HI）管道系统第1部分:最大工作压力为1巴（100千帕）的管道

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统