ISO 14273:2016-电阻焊 - 焊缝破坏性试验 - 试样尺寸及拉伸抗剪试验方法电阻点和压花投影焊-国家数字标准馆

现行 ISO 14273:2016

到馆阅读

收藏跟踪

购买正版

Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds 电阻焊 - 焊缝破坏性试验 - 试样尺寸及拉伸抗剪试验方法电阻点和压花投影焊

发布日期： 2016-03-03

                ISO 14273:2016规定了对厚度为0.5 mm至10 mm的任何金属材料的重叠板材中的点焊和压花凸焊进行拉伸剪切测试的试样尺寸和测试程序，其中焊缝的最大直径为7√t（其中t是以mm为单位的板材厚度）。
拉伸剪切试验的目的是确定试样能够承受的拉伸剪切力。

ISO 14273:2016 specifies specimen dimensions and a testing procedure for tensile shear testing of spot and embossed projection welds, in overlapping sheets, in any metallic material of thickness 0,5 mm to 10 mm, where the welds have a maximum diameter of 7√t (where t is the sheet thickness in mm).
The object of tensile shear testing is to determine the tensile shear force that the test specimen can sustain.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 25.160.40焊接、钎焊和低温焊 - 焊接接头

关联关系

研制信息

归口单位： ISO/TC 44/SC 6

相似标准/计划/法规

저항 용접 — 용접 파괴시험 —저항 점 용접 및 프로젝션 용접이음의 인장전단시험에 대한 시험편 치수 및 절차
电阻焊.焊缝的破坏性试验.拉伸剪切试验用试样尺寸和程序.电阻点焊和凸焊

BS EN ISO 14273-2016

Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for tensile shear testing resistance spot and embossed projection welds
电阻焊焊缝的破坏性试验电阻点焊和凸焊拉伸剪切试验的试样尺寸和程序

BS EN ISO 14272-2016

Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
电阻焊焊缝的破坏性试验电阻点焊和凸焊交叉拉伸试验的试样尺寸和程序

Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds
电阻焊 - 焊缝破坏性试验 - 电阻点和压花投影焊接的横向拉伸试验试样尺寸及程序

저항 용접 — 용접 파괴시험 —저항 점 용접 및 프로젝션 용접 이음의＋자 인장시험에 대한 시험편 치수 및 절차
电阻焊.焊缝的破坏性试验.电阻点焊和凸焊接头交叉拉伸试验的试样尺寸和程序

저항용접 — 용접부 파괴시험 — 저항점 용접부, 심 용접부 및 양각된 프로젝션 용접부의 기계화된 박리시험을 하기 위한 시험편의 치수와 절차
电阻焊.焊缝的破坏性试验.电阻点焊、缝焊和凸焊的机械剥离试验用试样尺寸和程序

BS EN ISO 14270-2016

Resistance welding. Destructive testing of welds. Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
电阻焊焊缝的破坏性试验机械剥离试验电阻点焊、缝焊和凸焊的试样尺寸和程序

Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for mechanized peel testing resistance spot, seam and embossed projection welds
电阻焊.焊缝的破坏性试验.机械剥离试验用试样尺寸和程序

BS EN ISO 18592-2019

Resistance welding. Destructive testing of welds. Method for the fatigue testing of multi-spot-welded specimens
电阻焊焊缝的破坏性试验多点焊接试样的疲劳试验方法

Resistance welding — Destructive testing of welds — Method for the fatigue testing of multi-spot-welded specimens
电阻焊 - 焊缝破坏性试验 - 多点焊接试件疲劳试验方法

DIN EN ISO 14272

Resistance welding - Destructive testing of welds - Specimen dimensions and procedure for cross tension testing of resistance spot and embossed projection welds (ISO 14272:2016)
电阻焊.焊缝的破坏性试验.电阻点焊和凸焊交叉拉伸试验的试样尺寸和程序（ISO 14272-2016）

Resistance welding — Destructive testing of welds — Specimen dimensions and procedure for impact tensile shear test and cross-tension testing of resistance spot and embossed projection welds
电阻焊 - 焊缝的破坏性试验 - 抗冲击拉伸剪切试验和电阻点和压花突起焊缝交叉拉伸试验的试样尺寸和程序

UNE-EN ISO 14323-2006

Resistance spot welding and projection welds - Destructive testing of welds - Specimen dimensions and procedure for impact shear test and cross-tension testing (ISO 14323:2006)
电阻点焊和凸焊.焊缝的破坏性试验.冲击剪切试验和交叉拉伸试验的试样尺寸和程序（ISO 14323-2006）

UNE-EN ISO 18592-2010

Resistance welding - Destructive testing of welds - Method for the fatigue testing of multi-spot-welded specimens (ISO 18592:2009)
电阻焊.焊缝的破坏性试验.多点焊接试样的疲劳试验方法（ISO 18592-2009）

BS EN ISO 17654-2011

Resistance welding. Destructive tests of welds. Pressure test of resistance seam welds
电阻焊焊缝的破坏性试验电阻焊缝的压力试验

Resistance welding — Destructive tests of welds — Pressure test of resistance seam welds
电阻焊——焊缝的破坏性试验——电阻焊缝的压力试验

BS EN ISO 17653-2012

Resistance welding. Destructive tests on welds in metallic materials. Torsion test of resistance spot welds
电阻焊金属材料焊缝的破坏性试验电阻点焊的扭转试验

Resistance welding — Destructive tests on welds in metallic materials — Torsion test of resistance spot welds
电阻焊——金属材料焊缝的破坏性试验——电阻点焊的扭转试验

DIN EN ISO 17654

Resistance welding - Destructive tests of welds - Pressure test of resistance seam welds (ISO 17654:2011)
电阻焊.焊缝的破坏性试验.电阻缝焊的压力试验（ISO 17654-2011）；德文版EN ISO 17654:2011

KS B ISO 14324(2021 Confirm)

저항 점 용접 — 용접부 파괴 시험 — 점 용접부의 피로 시험법
电阻点焊－焊缝破坏性试验－点焊接头疲劳试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

关于我们

查新颖性

查有效性

跟踪标准

比对标准

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统